Notices
928 Forum 1978-1995
Sponsored by:
Sponsored by: 928 Specialists

ROH Wheels

Thread Tools
 
Search this Thread
 
Old Dec 27, 2011 | 03:30 PM
  #1  
Adamant1971's Avatar
Adamant1971
Thread Starter
Rennlist Member
10 Year Member
 
Joined: Aug 2011
Posts: 7,269
Likes: 2,197
Default ROH Wheels

No affiliation, but I'm only a few minutes away if anyone needs them.

http://ontario.kijiji.ca/c-cars-vehi...AdIdZ340376372
Reply
Old Dec 27, 2011 | 03:39 PM
  #2  
Imo000's Avatar
Imo000
Captain Obvious
Super User
 
Joined: Aug 2003
Posts: 22,846
Likes: 348
From: Cambridge, Ontario, Canada
Default

"Set of 16 inch ROH (made in Australia) rims were previously used during winter storage of my 1991 Porsche 928GT . Rims are 2 different sizes: front is 7X16 with 65mm offset, rears are 8X16 with 52.3mm offset. These rims are slightly narrower than the GT wheels, and are the same size as a 928S4. Good condition. 5 X 130mm bolt pattern. $500 or best offer.
"

I thought the GT and the S4 had the same rim dimension.
Reply
Old Dec 27, 2011 | 03:42 PM
  #3  
Adamant1971's Avatar
Adamant1971
Thread Starter
Rennlist Member
10 Year Member
 
Joined: Aug 2011
Posts: 7,269
Likes: 2,197
Default

65mm is also a bit much isn't it? My Speedlines are 57mm for the front and also 7".
Reply
Old Dec 27, 2011 | 04:15 PM
  #4  
gearz's Avatar
gearz
Rennlist Member
15 Year Member
 
Joined: Nov 2009
Posts: 248
Likes: 2
From: The Mountains, WA
Default

Originally Posted by Adamant1971
65mm is also a bit much isn't it? My Speedlines are 57mm for the front and also 7".
Stock front wheel offset is 65mm on the S4; these wheels are the exact replacement for the stock wheels like the seller says.
They look good too.
Reply
Old Dec 27, 2011 | 04:43 PM
  #5  
EspritS4s's Avatar
EspritS4s
Rennlist Member
20 Year Member
 
Joined: Jul 2002
Posts: 2,095
Likes: 2
From: Massachusetts
Default

I have a set of these that I would sell for cheap if they weren't currently holding up on of my cars.

From what I've seen, these seem to be very popular with the late model Impala crowd.
Reply
Old Dec 27, 2011 | 06:00 PM
  #6  
JWise's Avatar
JWise
Drifting
20 Year Member
 
Joined: Dec 2003
Posts: 2,739
Likes: 276
From: Oklahoma
Default

Originally Posted by Imo000
I thought the GT and the S4 had the same rim dimension.
Assuming you meant width, not diameter, the GT has a 9" rear vs. the 8" rear on the S4.
Reply
Old Dec 27, 2011 | 06:49 PM
  #7  
SMTCapeCod's Avatar
SMTCapeCod
Race Car
15 Year Member
 
Joined: Jul 2005
Posts: 4,793
Likes: 92
From: Mechanochondriacism
Default

ROHs are sturdy, but tend to run heavy, fwiw.
Reply
Old Dec 27, 2011 | 09:36 PM
  #8  
Imo000's Avatar
Imo000
Captain Obvious
Super User
 
Joined: Aug 2003
Posts: 22,846
Likes: 348
From: Cambridge, Ontario, Canada
Default

Originally Posted by JWise
Assuming you meant width, not diameter, the GT has a 9" rear vs. the 8" rear on the S4.
Thanks! I didn't know this.
Reply




All times are GMT -3. The time now is 12:46 AM.