Notices
928 Forum 1978-1995
Sponsored by:
Sponsored by: 928 Specialists

Dumb question-oil breather hose?

Thread Tools
 
Search this Thread
 
Old 12-10-2011, 04:36 PM
  #1  
Jchiodi
Racer
Thread Starter
 
Jchiodi's Avatar
 
Join Date: May 2011
Location: West Chester Ohio
Posts: 262
Likes: 0
Received 0 Likes on 0 Posts
Default Dumb question-oil breather hose?

Took pics of the car prior to intake refresh. Smart move! Took them all from drivers side, not so smart! Almost got it all back and ready to put intake tubes back on but I dont know where that rearmost oil breather hose on rear PS valve cover goes?

I know it goes back in between the tubes somewhere,lol, just don't remember or see where it's supposed to go. And I can't find any more new hoses from Roger's kit! Just reading the description on his parts list and matching parts numbers to hoses really helped so far....

help

jc
Old 12-10-2011, 05:13 PM
  #2  
Hilton
Nordschleife Master
 
Hilton's Avatar
 
Join Date: Jun 2006
Location: ɹəpun uʍop 'ʎəupʎs
Posts: 6,285
Received 55 Likes on 45 Posts
Default

Originally Posted by Jchiodi
Took pics of the car prior to intake refresh. Smart move! Took them all from drivers side, not so smart! Almost got it all back and ready to put intake tubes back on but I dont know where that rearmost oil breather hose on rear PS valve cover goes?

I know it goes back in between the tubes somewhere,lol, just don't remember or see where it's supposed to go. And I can't find any more new hoses from Roger's kit! Just reading the description on his parts list and matching parts numbers to hoses really helped so far....

help

jc
The rear breather hose goes from the cam cover onto the plastic T on the side of the MAF boot nearest it. Its a straight shot there, so should be obvious which legs it goes between.

The other connection on the same T is the long hose with the hump in it that joins to the base of the oil filler neck.
Old 12-10-2011, 10:12 PM
  #3  
Jchiodi
Racer
Thread Starter
 
Jchiodi's Avatar
 
Join Date: May 2011
Location: West Chester Ohio
Posts: 262
Likes: 0
Received 0 Likes on 0 Posts
Default

Sorry to so obtuse! I'm looking at a pic of the throttle body/air guide I took out of the car, and looking at an old hose piece that I thought went to the valve cover rear.

There is a plastic valve (PVC) in the end of that hose that I thought connected to a long hose going down to the air guide as seen in that pic.

I think I have the one t valve connected correctly. I don't remember and can't find another t valve.
Attached Images   
Old 12-10-2011, 10:30 PM
  #4  
Hilton
Nordschleife Master
 
Hilton's Avatar
 
Join Date: Jun 2006
Location: ɹəpun uʍop 'ʎəupʎs
Posts: 6,285
Received 55 Likes on 45 Posts
Default

Oops, my mistake - I assumed y ou had an S4 or later

NFI - but a quick look in PET and it all looks like greek to me

The pics below show the breather hose, and also the ISV.
Attached Images   



Quick Reply: Dumb question-oil breather hose?



All times are GMT -3. The time now is 03:46 AM.