Carl Fausett

These are 3-piece CCW wheels in 17" diameter, 2 years old.

They have been raced at Pikes Peak in 2009 and road raced in 2010. Photo below shows them at Pike's.

The fronts are 17"x10 with a 6.0" backspace. Tires are Kumho Ecsta V700 275/40/ZR17

The rears are 17x12 with a 5.5" backspace. Tires are Kumho Ecsta V700
315/35/ZR17

These could be used for high-performance street or on a race car like I did. Tires are treadware = 50 and DOT approved.

Be advised - these offsets are agressive and will NOT fit under stock 928 fenders. Fender flares will be required. Of course, being a 3-piece wheel, you could also buy different barrels and reconfigure.

New, expect to pay about $2400 for this set of wheels and $1200 for these tires.

I like the CCW wheels very much. They are lightweight and strong. Because they are 3-piece wheels, if you bend one (like I did at Road Atlanta) you need only unbolt the bent barrel and replace it - about $100. Much less expensive than replacing a 1-piece forged wheel. This is my second set and I am planning to buy my 3rd set this winter.

If you are interested, PM me. I will leave this here on Rennlist for about a week, then they will go on eBay.

Carl Fausett

These tires and wheels were used in this video, where I was playing with a race-prepared Corvette on Michelin slicks

James Bailey

You might want to post them on the 911 forums as they would fit many early wide body cars. Also needs a price.....

Carl Fausett

Good idea.

Carl Fausett

Thank you for your interest.

The wheels have sold.