NOW $100 Belly Pan from 1991 S4 for sale
#1
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hi, I have a Engine belly pan from my previous 1991 S4.Very good condition except for one of the mounts (see picture). Would need a little fiberglass fabricating to recreate that mount but otherwise in really nice shape. I also have a ziploc bag containing most of the mounting screws.
Not sure what the value of these are, so how about $200 plus shipping?
Thanks,
Price lowered to $100 plus shipping. Thanks,
Not sure what the value of these are, so how about $200 plus shipping?
Thanks,
Price lowered to $100 plus shipping. Thanks,
Last edited by EMan 928; 09-27-2011 at 09:51 AM. Reason: price adjustment
#3
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I have a similar belly pan with the driverside mounting point intact but missing the ducts. Somebody could put together a complete one with both of these.
#4
Archive Gatekeeper
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
That mounting tab could be rebuilt, like so:
70 beans for the repair kit:
http://www.urethanesupply.com/5210.php
70 beans for the repair kit:
http://www.urethanesupply.com/5210.php
#5
Chronic Tool Dropper
Lifetime Rennlist
Member
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I made an AL support bracket that follows the shape of the original ears, goes across where the pan and the nose spoiler join under the radiator. Added NutSerts where the 5 screws go through so the nose and engine pans are held up snugly. Home Depot aluminum flat stock maybe 1.5-2" wide, a little work bending it in the vise with a mallet. Drilled the holes, and we are back on the road. Those original plastic ears get abused whenever a parking bumper flexes the nose up even a little. The metal part is much better, IMHO. I have a digram of it at home somewhere, but you can do one easily just following the factory contours.
#6
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Price reduced to $150 plus shipping. Almost had it going to a good home in Canada, but too much $$$ to ship.
It's all boxed up and ready to go!
It's all boxed up and ready to go!
Trending Topics
#8
Cottage Industry Sponsor
Lifetime Rennlist
Member
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Jerry Feather is working on it... kind of. We asked, begged, pleaded that he'd finish the rear fender liners first. Then he still has the console pieces to do, and then hopefully he'll get around to do the ducts...
#13
Rennlist Member
Thread Starter