DougM

Are the anti seize lubricants available in an equivalent source available at local part sources. From some research, it appears that white lithium grease is good for the white paste. What can be substituted for the lubricant on the splines? Regular silver anti seize?

blown 87

Which shaft do you have, that makes a difference on them. and I would strongly suggest using what Porsche calls for.

SeanR

+1 on this, call Roger, he can send you the paste most of us use.

Bilal928S4

I think the new sleeve (it carries the bearing) I think has a Teflon lining so it does not get any grease etc.
Bilal

DougM

Bilal
Where in New Canaan are you. I grew up there and am heading back for my 25th reunion next month. During my 20 years there I lived on Rocky Brook, Valley Road and Country Club Rd.

Bilal928S4

The part I meant was Clutch release bearing guide tube.
I am on White Oak Shade Road in New Canaan.
Bilal

Landseer

Last time I used Amsol aerosol open gear grease for the splines. Very sticky. Is working great.
Next time, though, I'll get the right Porsche lubricant from Roger.