RDK sensor install
#1
Rennlist Member
Thread Starter
RDK sensor install
I'm looking for confirmation that all the tan 2.5 bar sensors go on the front wheels and all the black 3.0 bar sensors go on the back wheels on my stock D90s.
When I had the wheels refinished, they removed the sensors then reinstalled with new o-rings, but they put one of each on each wheel. The WSM seems to indicate that they should be all 2.5 front and all 3.0 rear.
I didn't really pay attention when I got them back, but have noticed a few leaks at the sensors and picked up on the 2.5/3.0 deal while watching tiny bubbles form in the high tech soapy water leak detection fluid.
Thanks.
When I had the wheels refinished, they removed the sensors then reinstalled with new o-rings, but they put one of each on each wheel. The WSM seems to indicate that they should be all 2.5 front and all 3.0 rear.
I didn't really pay attention when I got them back, but have noticed a few leaks at the sensors and picked up on the 2.5/3.0 deal while watching tiny bubbles form in the high tech soapy water leak detection fluid.
Thanks.
#2
Archive Gatekeeper
Rennlist Member
Rennlist Member
Yes, 2.5 front, 3.0 rear.