ignition key cylinder problem

Reply Subscribe

Thread Tools

Search this Thread

Jul 7, 2011 | 10:52 AM

928Shane

Thread Starter

Rennlist Member

Joined: Oct 2007

Posts: 306

Likes: 0

From: Zeeland,Michigan

ignition key cylinder problem

I used a small punch to push my pin down into the cylinder,thinking I can remove it after the cylinder comes out. The cylinder is not coming out of the housing. Is there anything else I need to disconnect ?

Jul 7, 2011 | 11:39 AM

928Shane

Thread Starter

Rennlist Member

Joined: Oct 2007

Posts: 306

Likes: 0

From: Zeeland,Michigan

I got it, The pin did not go down far enough, i had to grind off the top of the pin to get the cylinder to slide out.

Jul 7, 2011 | 02:15 PM

James Bailey

Addict
Lifetime Rennlist
Member

Joined: Feb 2009

Posts: 18,061

Likes: 10

Right you needed to pull the pin out.....kind of like getting a splinter out of your finger. Driving it in does not work well at all.

Reply Subscribe