Pics of Perfex Splitter installed - UPDATED with New Supports Added
#1
Rennlist Member
Thread Starter
Pics of Perfex Splitter installed - UPDATED with New Supports Added
Was at the Frenzy this year and Ed (OBehave of bullet proof water pump fame) donated a splitter he has made for pre-S4 cars. The lucky winner had a S4, which he graciously offered for sale at a good price... Dave Roberts talked me into it, not that I needed much prodding. I jumped on it. Had it powder coated a matte black, looks almost exactly like the front spoiler. Finally had time to get the camera out and post some pictures. It looks awesome and mean on the car, watch you ankles!
Last edited by Glen McCartney; 12-26-2010 at 04:12 PM. Reason: Updated:
#4
Chronic Tool Dropper
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Looks like it will cut a tall beer can in half!
Very nice!
Very nice!
#6
Rennlist Member
Thread Starter
It bolts to the stock holes for the bottom tray, 5 screws, plus he has 5 brackets he made up, 3 along the front and one at each corner that bolt up to factory points for the lower grille, etc. It took about 1 hour to install if that. I didn't get any instructions, didn't need them. Once you see all the hardware included it pretty much explains itself.
#7
Inventor
Rennlist Member
Rennlist Member
Dayumm. That's a good lookin' '85, there, Mr. McCartney.
Trending Topics
#8
Rennlist Member
Thread Starter
Thanks Ken. Finally got to hook up the WB02 and Innovate too. Did some data logging runs, have to take a look at them, car seems to respond much better after I connected the LH octane loop, guess it want more fuel?
#9
Burning Brakes
Join Date: Mar 2008
Location: At the foot of Pikes Peak
Posts: 930
Likes: 0
Received 0 Likes
on
0 Posts
That's pretty serious looking. How driveable is it with the splitter on? I can barely make it out of my driveway now and avoid speed bumps at all costs.
#10
Glen, I absolutely LOVE your car. I was gonna ask the board if there was an S2/3 in guards red with black MY02 wheels or the ones you have. That's the route I plan on taking also. That splitter looks awesome too, but I seriously doubt I could get out my driveway with that surviving.
#11
Rennlist Member
Thread Starter
jp, Jon - car is about 100mph faster, seriously! On the street, can't tell too much. Looking forward to getting it on the track, I've been saying that the past 2 years. Last time I had a push, maybe this will give me just a little more downforce on the front.
I have the Eibach springs and car is lowered about 1 inch. I've only bottomed it once, slightly, didn't even scratch the powder coating, getting out of a gas station with pretty serious incline. You definitely watch for that, but other than that, it hasn't been a problem. I thought I would have bottomed it out a lot more.
I have the Eibach springs and car is lowered about 1 inch. I've only bottomed it once, slightly, didn't even scratch the powder coating, getting out of a gas station with pretty serious incline. You definitely watch for that, but other than that, it hasn't been a problem. I thought I would have bottomed it out a lot more.
#12
Administrator - "Tyson"
Lifetime Rennlist
Member
Lifetime Rennlist
Member
How much force can you put in the spoiler before it starts to deflect?
#13
Nordschleife Master
Glen,
Car looks GREAT! Love the lower stance, black wheels, aero mirrors, splitter! NICE JOB!
Tell me about the tranny rebuild. Was it done up in PA near you? I wonder if Mark A has a 4spd auto that would work in my '88 (prefer that it actually BE an '88 but with a new valve body so it ALWAYS starts in first) and I wonder how much it would cost????
I have one, but we don't know its status and I'd hate to put it in just to find it is not working (came out of a non-working car which is why we don't know the status.)
Car looks GREAT! Love the lower stance, black wheels, aero mirrors, splitter! NICE JOB!
Tell me about the tranny rebuild. Was it done up in PA near you? I wonder if Mark A has a 4spd auto that would work in my '88 (prefer that it actually BE an '88 but with a new valve body so it ALWAYS starts in first) and I wonder how much it would cost????
I have one, but we don't know its status and I'd hate to put it in just to find it is not working (came out of a non-working car which is why we don't know the status.)
#15
Nordschleife Master