Hi All,
I need help with the torque spec for the 4 bolts that hold the pump to the rear converter housing on my 3spd auto for 1980 Euro S. I'm looking at the WSM page 37-27,28 item 1 bolt, but it says to "Tighten to specified torque", but I can't find that torque number in the charts in Manual Volume 2.

Thanks,

 

That info is in the tech spec books located on section 2.15 of the CD's available from roger, if you have them. If not, specific to the 78-80 MY cars:

 

Here's the correct page for the pump,

 

Thanks Landseer, that's the info I needed!

 

Is there a spec for the flexplate to the flywheel. I looked in the WSM and can't find this anywhere. I torqued to 17flt lbs and also used blue loctite.