S4 Motor in an Early Car
#31
Been selling Twinkies on Ebay,
have some extra cash right now.
Rennlist Member
have some extra cash right now.
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
But seeing how you've taken the plunge... that's gonna be sweeet!
#32
Nordschleife Master
Thread Starter
#33
Nordschleife Master
Thread Starter
#35
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
You are going to need a flywheel with the correct timing teeth for the injection. That flywheel is a single disc late one which is too big to fit in your early bellhousing. If you wish to use double discs you need a custom 85-86 small diameter flywheel with the toothed ring off an 87 > automatic flywheel indexed and welded into place.
#36
Nordschleife Master
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
You are going to need a flywheel with the correct timing teeth for the injection. That flywheel is a single disc late one which is too big to fit in your early bellhousing. If you wish to use double discs you need a custom 85-86 small diameter flywheel with the toothed ring off an 87 > automatic flywheel indexed and welded into place.
Maybe MS would be the way to go.
![ducking](https://rennlist.com/forums/graemlins/icon107.gif)
#38
Nordschleife Master
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Never happened.