Pressure cable, Kickdown cable
Thread Starter
Racer
Joined: Oct 2009
Posts: 432
Likes: 0
From: Griffin, Georgia
Pressure cable, Kickdown cable
Hey guys, I am repairing alot of the PO's work on my 86 928S. In his attempt to do some of the work he cut the pressure cable off of the car and was able to lose the front piece that hooks in with the throttle. It appears the shroud is still there so I assume the piece in the tranny is also. The motor # M28/44, I am trying to find one if you have any ideas they would be greatly appreciated. Thanks Jack Davis
Thread Starter
Racer
Joined: Oct 2009
Posts: 432
Likes: 0
From: Griffin, Georgia
Here is a picture, it is just below the firewall, behind and to the right of that fuel hose. Sorry about the quality it was cold and dark. Thanks, JackAttachment 416671
Last edited by jacal128; Apr 22, 2012 at 10:24 PM.
Race Director
Joined: Sep 2007
Posts: 12,162
Likes: 383
From: Johnson City, TN
So, kind of in the middle of the cable, near the bracket that attaches it to the bell housing?
Hard to patch that.
I was hoping it was cut near the end and that parts of my spare 84 cable could be spliced into it.
Maybe somebody here has a spare 85/6/6.5 cable they would give-up.?
Hard to patch that.
I was hoping it was cut near the end and that parts of my spare 84 cable could be spliced into it.
Maybe somebody here has a spare 85/6/6.5 cable they would give-up.?
