Rennlist - Porsche Discussion Forums

Notices
928 Forum 1978-1995
Sponsored by:
Sponsored by: 928 Specialists

FS: Stroker Motor Build Parts

Thread Tools
 
Search this Thread
 
Old 09-24-2009, 10:32 AM
  #1  
Stan.Shaw@Excell.Net
Addict
Rennlist Member
Thread Starter
 
Stan.Shaw@Excell.Net's Avatar
 
Join Date: May 2001
Location: Wilbraham, MA
Posts: 2,758
Likes: 0
Received 0 Likes on 0 Posts
Default FS: Stroker Motor Build Parts
If anyone is considering building a stroker motor, I have most of the components gathered, and would sell them for my cost:

32v cams profiled for stroked 928 race motor
32v head with 968 valves
1986 block bored and lapped 104mm for 968 pistons
968 pistons with HPC coating
Scat crank, originally from 928 Intl
Oliver rods for 968 pistons and Scat crank
Main Bearings grooved
Rod bearings - clevite
Tri Y Headers Jet Hot Coated
Dry sump pan

$15k

Will consider an SC kit in trade

Deal pending on the following:
TBI intake with air box parts
MoTec M48 (from Sterling setup for 928)
Last edited by Stan.Shaw@Excell.Net; 09-28-2009 at 07:28 PM. Reason: pending deal on some parts
Stan.Shaw@Excell.Net is offline  
Reply Like
Old 09-24-2009, 10:53 AM
  #2  
hans14914
Rennlist Member
 
hans14914's Avatar
 
Join Date: Aug 2003
Location: Indianapolis
Posts: 2,596
Likes: 0
Received 247 Likes on 113 Posts
Default
Stan,

Are you selling it as a "kit" or also offering individual parts for sale? I would be interested in the headers if they are available separately.
hans14914 is offline  
Reply Like
Old 09-24-2009, 11:21 AM
  #3  
Stan.Shaw@Excell.Net
Addict
Rennlist Member
Thread Starter
 
Stan.Shaw@Excell.Net's Avatar
 
Join Date: May 2001
Location: Wilbraham, MA
Posts: 2,758
Likes: 0
Received 0 Likes on 0 Posts
Default
Originally Posted by hans14914
Stan,

Are you selling it as a "kit" or also offering individual parts for sale? I would be interested in the headers if they are available separately.
Only as a kit, unless I get offers on all the parts separately. The headers and drysump pan I wouldn't mind keeping, so could pull them out of the package if someone didn't want them.
Stan.Shaw@Excell.Net is offline  
Reply Like
Old 09-24-2009, 11:54 AM
  #4  
Rick Carter
Rennlist Member
 
Rick Carter's Avatar
 
Join Date: Apr 2004
Location: Central Ohio
Posts: 10,134
Received 68 Likes on 44 Posts
Default
This is like Deja Vu all over again. If anyone is thinking about building their own stroker, it takes time (often a lot of time, it can be very difficult finding 968 pistons for example) to source all the parts.
Rick Carter is offline  
Reply Like
Old 09-24-2009, 05:30 PM
  #5  
shaaark89
Addict
Rennlist Member
 
shaaark89's Avatar
 
Join Date: Jun 2001
Location: virginia
Posts: 1,057
Likes: 0
Received 1 Like on 1 Post
Default
stan,
if you decide to break it up i would be interested in the block. also where did you get the tri y headers?
shaaark89 is offline  
Reply Like
Old 09-24-2009, 08:08 PM
  #6  
90 S-4
Pro
 
90 S-4's Avatar
 
Join Date: Mar 2004
Location: OC. Calif
Posts: 633
Received 1 Like on 1 Post
Default
20K for all this stuff is a darn good value, if you set out on your own to
gather all this up you'd be over 38k easy ! Good luck Stan..
90 S-4 is offline  
Reply Like
Old 09-25-2009, 12:39 AM
  #7  
IcemanG17
Race Director
 
IcemanG17's Avatar
 
Join Date: Sep 2004
Location: Stockton, CA
Posts: 16,265
Received 71 Likes on 56 Posts
Default
Quiet a nice package....... I'm guessing the heads are 2R or later??
IcemanG17 is offline  
Reply Like

Trending Topics

Old 09-25-2009, 06:02 PM
  #8  
DANdeMAN
Three Wheelin'
 
DANdeMAN's Avatar
 
Join Date: Nov 2004
Location: Gatineau/Ottawa Canada 84 928S triple black
Posts: 1,372
Likes: 0
Received 1 Like on 1 Post
Default
Take pics of everything and everyone who touches and/or ships it...You know, just in case they get lost or something.
DANdeMAN is offline  
Reply Like
Old 09-25-2009, 06:19 PM
  #9  
John Veninger
Addict
Lifetime Rennlist
Member
 
John Veninger's Avatar
 
Join Date: May 2001
Location: New Jersey
Posts: 3,921
Received 32 Likes on 21 Posts
Default
So whats the plan for the track car?
John Veninger is offline  
Reply Like
Old 09-26-2009, 09:31 PM
  #10  
Stan.Shaw@Excell.Net
Addict
Rennlist Member
Thread Starter
 
Stan.Shaw@Excell.Net's Avatar
 
Join Date: May 2001
Location: Wilbraham, MA
Posts: 2,758
Likes: 0
Received 0 Likes on 0 Posts
Default
Originally Posted by DANdeMAN
Take pics of everything and everyone who touches and/or ships it...You know, just in case they get lost or something.
I always ship insured
Stan.Shaw@Excell.Net is offline  
Reply Like
Old 09-26-2009, 09:34 PM
  #11  
Stan.Shaw@Excell.Net
Addict
Rennlist Member
Thread Starter
 
Stan.Shaw@Excell.Net's Avatar
 
Join Date: May 2001
Location: Wilbraham, MA
Posts: 2,758
Likes: 0
Received 0 Likes on 0 Posts
Default
Originally Posted by John Veninger
So whats the plan for the track car?
No definite plans, some thoughts, but still other projects in front of it. Possibly race it in a different GT class with a smaller motor.
Stan.Shaw@Excell.Net is offline  
Reply Like
Old 09-26-2009, 09:36 PM
  #12  
Stan.Shaw@Excell.Net
Addict
Rennlist Member
Thread Starter
 
Stan.Shaw@Excell.Net's Avatar
 
Join Date: May 2001
Location: Wilbraham, MA
Posts: 2,758
Likes: 0
Received 0 Likes on 0 Posts
Default
Originally Posted by IcemanG17
Quiet a nice package....... I'm guessing the heads are 2R or later??
S4 heads, but not the large boss S4 heads (I think those are 4R), correct?
Stan.Shaw@Excell.Net is offline  
Reply Like
Old 09-28-2009, 12:39 AM
  #13  
Stan.Shaw@Excell.Net
Addict
Rennlist Member
Thread Starter
 
Stan.Shaw@Excell.Net's Avatar
 
Join Date: May 2001
Location: Wilbraham, MA
Posts: 2,758
Likes: 0
Received 0 Likes on 0 Posts
Default
Originally Posted by shaaark89
stan,
if you decide to break it up i would be interested in the block. also where did you get the tri y headers?
PM sent
Stan.Shaw@Excell.Net is offline  
Reply Like
Tags
Back to Subforum
928 Forum
View Next Unread
928 T-belt/waterpump service near SE MN?




Advanced Search
Quick Reply: FS: Stroker Motor Build Parts


Reply Closed Thread Share
Forum Jump

All times are GMT -3. The time now is 11:24 PM.