Parting out 1988 5 speed
#34
Race Car
Thread Starter
Going to Atlanta tomorrow morning (09-30-09). I can deliver the "engine block" and heads for $750! The engine block is still assembled but the cranks/rods/pistons may be bad.
#36
Done With Sidepatch
Rennlist Member
Rennlist Member
An update on the parts I purchased from Gio. These included two speaker grilles and a fog light switch. Gio photographed an almost invisible flaw on one of the grilles and I had to look three times to find it! The parts arrived better than described and were shipped promptly. Nothing but happy here.
I'm adding this update as positive feedback for the interested audience,
Gio, thank you Sir!
I'm adding this update as positive feedback for the interested audience,
Gio, thank you Sir!
#37
Race Car
Thread Starter
An update on the parts I purchased from Gio. These included two speaker grilles and a fog light switch. Gio photographed an almost invisible flaw on one of the grilles and I had to look three times to find it! The parts arrived better than described and were shipped promptly. Nothing but happy here.
I'm adding this update as positive feedback for the interested audience,
Gio, thank you Sir!
I'm adding this update as positive feedback for the interested audience,
Gio, thank you Sir!
#38
Race Car
Thread Starter
The A/C compressor may be sold, I'll find out in a few days for sure. Sending you a pm on the window trim. Thanks, G
#40
Racer
Hi Gio,
Do you know if the rear seat cushions will fit a 1986 Euro? if so, are you selling only the bases, or does this include the top folding section also?
Last question - what will shipping to UK be?
Thanks
Jay
Do you know if the rear seat cushions will fit a 1986 Euro? if so, are you selling only the bases, or does this include the top folding section also?
Last question - what will shipping to UK be?
Thanks
Jay
#41
Addict
Rennlist Member
Rennlist Member
gio,
are the heads complete with all hardware (cam bridges, cam chain tensioners, cams, etc?) what issue do you see with the cam that needs polishing?
thanks,
are the heads complete with all hardware (cam bridges, cam chain tensioners, cams, etc?) what issue do you see with the cam that needs polishing?
thanks,
#42
Race Car
Thread Starter
Tom,
Some have said the cam will polish fine. I will take some close-up pics and post them on this thread tonight... ALL hardware is included minus the cam covers.
Thanks,G
Some have said the cam will polish fine. I will take some close-up pics and post them on this thread tonight... ALL hardware is included minus the cam covers.
Thanks,G
#43
Race Car
Thread Starter
Jay,
The top section is $25 extra since it has some defect. I can email you some pics if you like. Shipping to UK? I will need to check. Please pm me your address.
Thanks, G