Darien

No I'm not a dealer, but I have another set of OEM Hollow Spokes for sale with Kumho ECSTA tires. The front tires have lots of tread but are worn on the inside tread and the rear tires have lots of tread remaining. They will come with the colored center caps.

Front Wheels: 8J 18 ET 50 Part # 996.362.136.04
Front Tires: 225/40/18

Rear Tires: 11J 18 ET 45 Part # 996.363.142.03
Rear Tires: 295/30/18

$1,300 shipped

Here's a few pics of them on my Shark and without the tires installed.

David L. Lutz

I puchased the last set Darian had for sale and am in love with them. The fitment was perfect, and for me just the right amount of updating and not too much bling. Especially for my car.

With the 295's in the rear WOW what a different look!





Also I just have to add, if your worried about shipping don't. Darian shipped them to me New Mexico to Florida arrived safe and sound. The packing job was over the Top.

Jadz928

Not to steal your thread Darien, but are you guys rolling your rears to fit 295/30?

I got a set of hollow spoke TT's on way... and trying to decide btw 285 and 295. I really don't want to roll the fender.

Good luck with the sale, Darien. Should not be a problem selling them for that price.

David L. Lutz

I did not roll my fenders. I just gave them a good tug before I bolted on the rears.

My ride height In the rear (only) was a little lower than spec. around 170mm (IIRC spec. is 175mm). I did raize the rear to about 180mm which I think is in tolerance according to the WSM.

In the pic's I posted the ride height had not yet been adjusted higher.

Also not to high jack this thread, but if I only raised the rear approx. 10mm do I need to get an alignment again. (I just aligned my car a month or so ago?) I have noticed in many threads the answer is "yes"

Darien

Hey Jim, It really depends on your rear suspension. On my 86.5 they fit perfect with only a tug on the fenders. Tony has the same and I think he rolled only his fender lips. On my 88 with worn suspension, I had to roll the fenders, but I ended up adjusting the ride height.

Darien

Dave, did you get the alignment at Sears? If so, I think they give a 6 month warranty so you could take it back and say you want it checked again. But I don't think you need to worry with that small amount of ride height adjustment only on the rears

Jadz928

Thanks Guys! I'm kinda stuck with 285s anyway because that's the largest all-sesaon available. Year round DD.

RyanPerrella

Darien

What color is your car, its a really nice shade

Darien

Thanks Ryan...it's Meteor Met

RyanPerrella

very nice shade, do you know off hand what years it was available?

Hilton

http://www.landsharkoz.com/htm/sc/colourblack.htm

Looks like it was available in 82, 85 and 86.

Warren928

I am curious. I bought a set of 18" x 10J porsche Carrera 4 sport wheels that actually measured 11" wide from edge to edge.

Does a 11 J measure 12" wide from edge to edge?

Jadz928

roughly, yes. The 11" measurement is to the inner lip (I think called rim bead).

Darien

Alright, back to the original post

Still for sale.

Jadz928

Darien,
Hey man, I'm just bumpin' ya. ...wait, that didn't sound right.