4.7 m28/11 how to check cam timing on drivers side?
07-15-2008, 07:35 PM
#1
Pro
Thread Starter
Join Date: Jun 2008
Location: Holland, MI
Posts: 545
Likes: 0
Received 0 Likes
on
0 Posts
4.7 m28/11 how to check cam timing on drivers side?
I have a euro spec w/a 16v m28/11 1980 928s.... I'm going to be replacing the TB, waterpump, rebuild tensioner, replace rollers, boot, put in a new engine harness.... I have about 2k in parts going onto the car this weekend(or next depending on when parts arrive) I have my dampner set at zero and the passenger side cam notch lines up with the timing mark. Does the drivers side have a mark too? I purchased a flywheel locking tool and a belt tensioner... will I need anything else? If any1 lives in MI and want to help out my fridge has free Beer!
07-15-2008, 08:43 PM
#2
Three Wheelin'
Join Date: Jun 2001
Location: Omaha, NE
Posts: 1,319
Likes: 0
Received 0 Likes
on
0 Posts
I did this a couple years ago and if I recall correctly the driver's side also has marks. A notch if I'm not mistaken. I could have sworn I had a picture of that, but I can't find it right now, sorry I can't be more specific.
07-15-2008, 11:03 PM
#3
Inventor
Rennlist Member
Rennlist Member
16V | 32V
07-15-2008, 11:11 PM
#4
Pro
Thread Starter
Join Date: Jun 2008
Location: Holland, MI
Posts: 545
Likes: 0
Received 0 Likes
on
0 Posts
PorKen you are my hero!!! I have the timing covers off and didn't know where the heck the timing mark was! As soon as I saw the pic.... DUH! Thanks a bunch man. Looks like my old belt is spot on! Out with the old and in with the new!
Thanks again!
Thanks again!
