BBS Replica Wheels
#17
Official Bay Area Patriot
Fuse 24 Assassin
Rennlist Member
Fuse 24 Assassin
Rennlist Member
Thread Starter
#18
Rennlist Member
Join Date: Feb 2008
Location: Lillington, NC
Posts: 2,742
Likes: 0
Received 0 Likes
on
0 Posts
#19
Official Bay Area Patriot
Fuse 24 Assassin
Rennlist Member
Fuse 24 Assassin
Rennlist Member
Thread Starter
Those are "basket weaves." I'm actually looking for something with less spokes.
On the other hand I talked to Wheel Dynamics yesterday afternoon. They sell GT3 replica wheels that are 8.5's and 11's with black painted centers. I was thinking about a set of those. I don't know if an 11" wheel will fit in the back though. I think Bill Ball has a set of GT3 wheels on his 928 and they look pretty sharp. I want those black centers though. They look hot!
On the other hand I talked to Wheel Dynamics yesterday afternoon. They sell GT3 replica wheels that are 8.5's and 11's with black painted centers. I was thinking about a set of those. I don't know if an 11" wheel will fit in the back though. I think Bill Ball has a set of GT3 wheels on his 928 and they look pretty sharp. I want those black centers though. They look hot!
Last edited by Mongo; 05-03-2008 at 01:51 PM.
#20
Official Bay Area Patriot
Fuse 24 Assassin
Rennlist Member
Fuse 24 Assassin
Rennlist Member
Thread Starter
http://cgi.ebay.com/ebaymotors/18-Po...m250243833612&
Wow these are a pretty good deal! What do you guys think? I'm not too fond of a 2.5" lip on the rear wheels, but maybe it will grow on me.
The front's are 52mm offset and the rears are a 58mm. I know 65 is recommended, but would a 58 fit good in the rear without having to roll the fenders?
Wow these are a pretty good deal! What do you guys think? I'm not too fond of a 2.5" lip on the rear wheels, but maybe it will grow on me.
The front's are 52mm offset and the rears are a 58mm. I know 65 is recommended, but would a 58 fit good in the rear without having to roll the fenders?
Last edited by Mongo; 05-03-2008 at 10:03 PM.
#21
Drifting
Join Date: Dec 2003
Location: an unnatural suburban habitat
Posts: 2,902
Likes: 0
Received 0 Likes
on
0 Posts
I would say to be careful buying some of these wheels. Unless they are really heavy (and strong) they may bend real easy if you hit anything.
There are a lot of bent bargain wheels out there bumping down the road. They still look good when they are bent...
There are a lot of bent bargain wheels out there bumping down the road. They still look good when they are bent...