Crazy knock counts... what gives?
08-23-2008, 09:52 PM
#61
Supercharged
Rennlist Member
Rennlist Member
Thread Starter
Join Date: May 2002
Location: Back in Michigan - Full time!
Posts: 18,925
Likes: 0
Received 59 Likes
on
33 Posts
I'm pretty sure it was the harness. I have not definitively tested it since the new harness, but plan to next weekend. I'll report back.
08-23-2008, 10:02 PM
#62
Drifting
I am interested because I am on the steep learning curve with the ezk, I did some data logging and in 5 minutes of Idling I logged 9999 knock counts. I am on the hunt now.
thanks Andrew
thanks Andrew
08-23-2008, 10:16 PM
#63
Supercharged
Rennlist Member
Rennlist Member
Thread Starter
Join Date: May 2002
Location: Back in Michigan - Full time!
Posts: 18,925
Likes: 0
Received 59 Likes
on
33 Posts
Andy-
John Speak had posted that people with the digital dash may need to disconnect a particular line to avoid certain knock counts. I'm sorry I don't recall the post, but it's out there.
John Speak had posted that people with the digital dash may need to disconnect a particular line to avoid certain knock counts. I'm sorry I don't recall the post, but it's out there.
08-09-2014, 06:49 PM
#65
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
08-10-2014, 06:19 AM
#66
Rennlist Member
THat was nothing to do with a diagnostic tester. It was necessary when using the ST1 with PEMs. The green wire was the K data line feed to the digidash panel. Disconnecting it while Sharktuning overcame the problem. The ST2 doesn't need it.