Stroker....spec's?
02-14-2002, 02:32 PM
#1
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Thread Starter
Join Date: May 2001
Location: Hotlanta - NE of the Perimeter
Posts: 12,269
Received 267 Likes
on
154 Posts
Stroker....spec's?
Well....
Stroke - 95.75 mm for the Crankshaft throws.
Pistons - 104 mm
Connecting Rods - ????
Anyone know the numbers? I was able to determine that the stock connecting rods are 5.906" C-C.
So, if one strokes the motor - what size connecting rods are used?
TIA-
Stroke - 95.75 mm for the Crankshaft throws.
Pistons - 104 mm
Connecting Rods - ????
Anyone know the numbers? I was able to determine that the stock connecting rods are 5.906" C-C.
So, if one strokes the motor - what size connecting rods are used?
TIA-
