Original or Aftmarket Y-Pipe?
03-12-2008, 04:41 AM
#1
Rennlist Member
Thread Starter
Original or Aftmarket Y-Pipe?
This should probably be on Hacker's novice thread, but...
Can anyone tell if this is original our aftermarket from these horrible pix?
The car is an 82US.
Thanks to all.
Can anyone tell if this is original our aftermarket from these horrible pix?
The car is an 82US.
Thanks to all.
03-12-2008, 05:32 AM
#2
Track Day
Join Date: Mar 2004
Location: Stockholm Sweden/ ex NZ
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Not factory
Set of MSDS headers joined to 3" going into 2½" single, IMHO no the system is not factory original.
Seen better welding work as well, however still a very nice setup.
Seen better welding work as well, however still a very nice setup.
Last edited by Kiwi; 03-12-2008 at 07:23 AM.
03-12-2008, 12:16 PM
#4
Administrator - "Tyson"
Lifetime Rennlist
Member
Lifetime Rennlist
Member
I have a very similar setup on my 79, perfect upgrade for a 16V.
03-12-2008, 01:21 PM
#5
Inventor
Rennlist Member
Rennlist Member
03-12-2008, 06:12 PM
#6
Rennlist Member
Thread Starter
Thanks for the help guys.
One more thing, any idea what sort of horsepower gain you would expect from these, assuming all else is stock.
I went to the MSDS web site. It said that all their headers were at least 14% with 928's getting up to 23%.
I assume the 23% is for the 32V crowd. Can I safely guess 18-20%?
Thanks again,
One more thing, any idea what sort of horsepower gain you would expect from these, assuming all else is stock.
I went to the MSDS web site. It said that all their headers were at least 14% with 928's getting up to 23%.
I assume the 23% is for the 32V crowd. Can I safely guess 18-20%?
Thanks again,
