928 Parts Garage Sale: Members Only. Delete If Sold. No 'Parts Wanted' Read Post 1
03-09-2008, 01:03 AM
#76
928 Collector
Rennlist Member
Rennlist Member
Hi Nines ... fenders ... I have some with and some with no strips... Doors have strips.
03-11-2008, 04:36 PM
#78
Rennlist Member
2 Y-Pipes for pre 87. Both are used. One is referred to as the "test pipe" from Porsche. Neither is rusted on the outside. Neither is new! Not sure how good they are on the inside? Both have the bung for an 02 sensor but no sensor included. My car doesn't know what an 02 sensor is! And No, they wont fit any 87+.
Also have a used Ansa rear muffler for pre-87. Should bolt straight up to MY's 80 - 82 single exhaust but has a flange that can be bolted to a flange installed on any pipe there previously. $860 new from Ansa.
$50 + shipping for each from zip 20164.
Thanks Randy for allowing the 928 swap meet.
Pipe on right NOT available. See correct pipe in next post.
Also have a used Ansa rear muffler for pre-87. Should bolt straight up to MY's 80 - 82 single exhaust but has a flange that can be bolted to a flange installed on any pipe there previously. $860 new from Ansa.
$50 + shipping for each from zip 20164.
Thanks Randy for allowing the 928 swap meet.
Pipe on right NOT available. See correct pipe in next post.
Last edited by BeerFish; 03-25-2008 at 02:19 PM. Reason: Add correction
03-11-2008, 05:19 PM
#79
Addict
Rennlist Member
Rennlist Member
Thread Starter
928 Parts "Garage Sale" Update
It's pretty obvious that this thread serves a useful purpose and thanks goes to Rennlist for supporting our hobby in this way. For me, any money I get for parts will go to buy yet other parts that I need to sustain my 928 addiction (the Big Four have some really cool items I'm saving for). Below is updated wording that, hopefully, will help sustain this thread until our cars are fully appointed as we want them to be:
--
Rid the garage of accumulating car parts and free up space/money so you can continue the 928 upgrade cycle and support the (critical to everyone) Rennlist sponsors.
GUIDELINES
1. List your asking price and make wording/price adjustments as needed (Note: This is not an auction).
2. If interested, PM the seller directly - don't post in this thread. Item goes to first person to PM the seller with an acceptable offer to buy.
3. Promptly remove items as they are sold.
4. No 'Parts Wanted' postings.
4. No commercial sales or "side-line" parts business.
5. Open to paid Members only
--
Rid the garage of accumulating car parts and free up space/money so you can continue the 928 upgrade cycle and support the (critical to everyone) Rennlist sponsors.
GUIDELINES
1. List your asking price and make wording/price adjustments as needed (Note: This is not an auction).
2. If interested, PM the seller directly - don't post in this thread. Item goes to first person to PM the seller with an acceptable offer to buy.
3. Promptly remove items as they are sold.
4. No 'Parts Wanted' postings.
4. No commercial sales or "side-line" parts business.
5. Open to paid Members only
03-12-2008, 09:34 AM
#81
Rennlist Member
Center console cassette box black, no inserts decent shape interior with minor hole in vinyl cover around 3/16" dia. $85+ actual shipping continental US only.
03-16-2008, 09:55 AM
#82
Addict
Rennlist Member
Rennlist Member
Join Date: May 2001
Location: Wilbraham, MA
Posts: 2,758
Likes: 0
Received 0 Likes
on
0 Posts
pre-85 Tune-up Parts
The following were in my race car motor for about 1 hour, so are essentially new.
Wires are Magnecor, 8mm, red.
Bosch plugs, tips are black but not coated.
Cap & rotor
$200 including shipping in US 48
Infamous green wire,this is what goes from the ignition control unit to the distributor. It runs across the top front of the motor so is commonly damaged.
Like new
$75 including mailing in US 48
Wires are Magnecor, 8mm, red.
Bosch plugs, tips are black but not coated.
Cap & rotor
$200 including shipping in US 48
Infamous green wire,this is what goes from the ignition control unit to the distributor. It runs across the top front of the motor so is commonly damaged.
Like new
$75 including mailing in US 48
03-25-2008, 01:46 PM
#83
Craic Head
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Original Blaupunkt amp and fader switch with wiring to plug
I just did some interior work and eliminated the amplifier and fader switch with the wiring back to the plugs under the front seat.
Can sell together or as a set.
Amp looks good, but I'm not sure if it works because the HU was stolen before I got the car. If it doesn't work, I'll return your money.
Pics on request.
member price: $45 for amp, $10 for fader/wiring or $50 for set
non-member price: $55 for amp, $12 for fader/wiring or $60 for set
Can sell together or as a set.
Amp looks good, but I'm not sure if it works because the HU was stolen before I got the car. If it doesn't work, I'll return your money.
Pics on request.
member price: $45 for amp, $10 for fader/wiring or $50 for set
non-member price: $55 for amp, $12 for fader/wiring or $60 for set
03-26-2008, 02:57 PM
#84
Fleet of Foot
Rennlist Member
Rennlist Member
Two 16X7 anodized "Flats", curb rash and scuffs, no center caps. Will provide pic's on request. $FREE, you pick up or pay shipping.
03-27-2008, 12:27 AM
#85
Rennlist Member
Join Date: Feb 2008
Location: Lillington, NC
Posts: 2,742
Likes: 0
Received 0 Likes
on
0 Posts
996 Carrera 18"x8" Wheel
996 Carrera Wheel (Italian made replica)
18"x8" with 50mm offset.
New with center cap. Never mounted and straight.
$100 plus shipping.
18"x8" with 50mm offset.
New with center cap. Never mounted and straight.
$100 plus shipping.
03-27-2008, 02:48 PM
#86
Nordschleife Master
S4 GT and GTS Parts for sale
Last edited by RyanPerrella; 04-28-2008 at 11:48 PM.
03-28-2008, 02:01 PM
#87
Racer
Join Date: Sep 2005
Location: Clarkston Mi
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
Good matched set of 8 968 pistons. 100 bucks each.
GTS Crank. $1,000.
Fenders $50 each.
Hoods $50 each.
86.5 tailpipe system $50.
S4 tailpipe system $50
Doors (bare) $50 each
S4 rear bumper cover $100
S4 bare body with dash, instruments, suspension, rear and front bumpers, glass, lights (no windshield and no fogs); with 89 gearbox and torque tube $4,000
89 S4 gearbox and torque tube (under 80k miles) $2500
racing tyres (17-in ... set of 4) ... one DE day on them $50 each
17-in snow tyres, almost full tread, off my GTS $200
MAF ... good used from S4 $200
rear luggage cover in burgundy, and one in black - used $100 ea
centre console in leather $100
black 12-way seats $600
black S4 rear seats $100
door interior panels $100 each
85/86 wiring harness for LH $150
86 LH $400
86 EZK $100
S4 LH $500
one S4 saddle colour seat in good shape $150
front air duct for earlier car $50
burgundy mat set $60 SOLD
more will follow
GTS Crank. $1,000.
Fenders $50 each.
Hoods $50 each.
86.5 tailpipe system $50.
S4 tailpipe system $50
Doors (bare) $50 each
S4 rear bumper cover $100
S4 bare body with dash, instruments, suspension, rear and front bumpers, glass, lights (no windshield and no fogs); with 89 gearbox and torque tube $4,000
89 S4 gearbox and torque tube (under 80k miles) $2500
racing tyres (17-in ... set of 4) ... one DE day on them $50 each
17-in snow tyres, almost full tread, off my GTS $200
MAF ... good used from S4 $200
rear luggage cover in burgundy, and one in black - used $100 ea
centre console in leather $100
black 12-way seats $600
black S4 rear seats $100
door interior panels $100 each
85/86 wiring harness for LH $150
86 LH $400
86 EZK $100
S4 LH $500
one S4 saddle colour seat in good shape $150
front air duct for earlier car $50
burgundy mat set $60 SOLD
more will follow
Heinrich did you get my PM about the hood?
Regards
Matt
03-30-2008, 08:52 PM
#88
Addict
Rennlist Member
Rennlist Member
Join Date: May 2001
Location: Wilbraham, MA
Posts: 2,758
Likes: 0
Received 0 Likes
on
0 Posts
16v 928 tune-up parts. From my last race car motor that lasted about an hour 
Magencor spark plug wires 8mm(?) red.
Bosch plugs, a bit dirty but not worn
Distributer cap & rotor
$200 including shipping in US 48.
Will include similarly near new infamous green wire as well for another $75. This is what goes from the ignition control unit to the distributor. It runs across the top front of the motor so is commonly damaged.
Offers happily considered
Magencor spark plug wires 8mm(?) red.
Bosch plugs, a bit dirty but not worn
Distributer cap & rotor
$200 including shipping in US 48.
Will include similarly near new infamous green wire as well for another $75. This is what goes from the ignition control unit to the distributor. It runs across the top front of the motor so is commonly damaged.
Offers happily considered
Last edited by Stan.Shaw@Excell.Net; 03-30-2008 at 09:38 PM.
03-30-2008, 11:51 PM
#89
Nordschleife Master
S4 intake valves 37mm
I have a set of 4 really nice S4 GT GTS intake valves. No carbon, fully polished OE Valves with the Porsche "P"
$80 + $10 shipping
or $25 each if you just want one or 2
also on Ebay
http://cgi.ebay.com/ebaymotors/ws/eB...211987756&rd=1
First PM gets em.
ALSO HAVE: (See post #89 for pics and details)
Smog pump $50
Rear bumper shocks Pair $40
$8 shipping
ryanperrella@gmail.com
$80 + $10 shipping
or $25 each if you just want one or 2
also on Ebay
http://cgi.ebay.com/ebaymotors/ws/eB...211987756&rd=1
First PM gets em.
ALSO HAVE: (See post #89 for pics and details)
Smog pump $50
Rear bumper shocks Pair $40
$8 shipping
ryanperrella@gmail.com
Last edited by RyanPerrella; 04-09-2008 at 10:16 PM.
04-03-2008, 09:02 PM
#90
Nordschleife Master
Garage clean up/moving sale.
Ok folks, time for a garage clean up/moving sale.
I have just purached a house and decided I wanted to get rid of alot of the things I have.
this is a pic of everything I have that I am wanting to liquidate right now.
More pics can be provided on request.
Dual disk flywheel and intermediate plate. $300
ABS pump (1985) with relays still in it, $50
ABS brain, (1985) $100
Locking gascap with key. $50 - SOLD
Final stages with cover (from 1986) $50
Smog pump (1987) spins freely, worked when removed. $100
Flapper box, foam is not in good condition has vacuum actuator $5
1981 sunroof motor, one wire has come out of the connector but motor runs nicely $20
headlight adjustment switch with lines $10
shock covers with metal washers for rear, $15 - SOLD
front height adjusters with hats (came off Boges) $20 - SOLD
2 tensioning arms (1987) with rollers. $10/piece
1 pivot brace (1987) $5
1 1981 tensioner with internals, no oil holes, $5
1 1986 tensioner with internals, holes with plugs not bleeders $5
sorry but the 3 tensioners from the later years are being sent to 928intl
Please pm me, or email cjensan AT gmail.com
All prices are OBO and do not include shipping.
If you see something listed that you think is overpriced etc. MAKE AN OFFER, I want this stuff gone.
I have just purached a house and decided I wanted to get rid of alot of the things I have.
this is a pic of everything I have that I am wanting to liquidate right now.
More pics can be provided on request.
Dual disk flywheel and intermediate plate. $300
ABS pump (1985) with relays still in it, $50
ABS brain, (1985) $100
Locking gascap with key. $50 - SOLD
Final stages with cover (from 1986) $50
Smog pump (1987) spins freely, worked when removed. $100
Flapper box, foam is not in good condition has vacuum actuator $5
1981 sunroof motor, one wire has come out of the connector but motor runs nicely $20
headlight adjustment switch with lines $10
shock covers with metal washers for rear, $15 - SOLD
front height adjusters with hats (came off Boges) $20 - SOLD
2 tensioning arms (1987) with rollers. $10/piece
1 pivot brace (1987) $5
1 1981 tensioner with internals, no oil holes, $5
1 1986 tensioner with internals, holes with plugs not bleeders $5
sorry but the 3 tensioners from the later years are being sent to 928intl
Please pm me, or email cjensan AT gmail.com
All prices are OBO and do not include shipping.
If you see something listed that you think is overpriced etc. MAKE AN OFFER, I want this stuff gone.
Last edited by Lizard928; 04-07-2008 at 02:34 PM.