Lonestar JR

Thought I would change the seal while doing the tension belt, but I can't see how to remove the sprocket in front of it. Any suggestions? Thanks in advance.

shaaark89

last time i did it was on the 87 and used a gear puller with a quarter (official porsche tool ;-p) on the end of the crank for the puller to seat against.

PorKen

Tom - I believe this was the factory tool:

<img src="http://members.eunet.at/robb/germanenglish/deutschm.jpg" alt=" - " />

Has since been superceeded by:

<img src="http://www.votsalakia.com/euro/1eurov.jpg" alt=" - " />

jpitman2

Just slid off when I did it... maybe I was just lucky?
jp 83 Euro S AT 45k

tresamore

I just disassembled my 87 motor and the pulley just slid off.