Well, "hoses" actually.

Can anyone post or email me a picture of the oil hoses beneath the intake manifold on an 85-86 that includes part numbers? (i.e. image from the legendary PET CD)

I need to replace several oil hoses and I haven't been able to find anything that would indicate the part numbers of the various hoses.

email is davesq2001@hotmail.com

Thanks in advance!

<img src="graemlins/drink.gif" border="0" alt="[cherrsagai]" />

 

Call 928 Specialists in NC. Their # is: 828.766.9280.

 

Hi,
Here is a text description of the hoses for 85-86 , hope this helps.


N.020.139.1 Hose - Rigid Vacuum Line (per Meter) 3 x $2.48 = $7.44

928.110.248.03 Intake 85-86 Sleeve - Throttle Body&gt;Center Intake $10.19

999.701.699.40 Intake 85-86 Seal - Large - Mass Sensor&gt;Air guide
$6.38

999.701.183.50 Intake 85-86 Seal - Small - Mass Sensor&gt;Air guide $2.28

999.701.436.40 Intake 80-86 O-Ring - Air Guide&gt;Throttle Body $8.68

928.110.347.00 Intake 85-86 Rubber Seal - Large(2 req) 2 x $13.75 =
$27.50

928.110.343.00 Intake 85-86 Rubber Seal - Small(8 req) 8 x $2.81 =
$22.48

928.574.717.02 Vacuum - Rubber Elbow 10 x $2.63 = $26.30

928.110.441.02 Vacuum - Splitter - 7way@rear of Intake - Auto $18.71

928.110.243.02 Intake 85-86 Sleeve - Mass Sensor&gt;Airbox $12.93

928.110.602.00 Intake 85-86 Hose - "T" &gt; Center Intake Port $12.47

928.110.673.00 Intake 85-86 Hose - "T" &gt; Vacuum Valve@x-brace $20.71

928.107.601.00 Intake 85-86 Hose - "T" &gt; Oil Fill (short) $15.91

928.107.445.00 Intake 85-86 Hose - CmCover-Front&gt;Oil Fill $29.43

928.107.313.00 Intake 85-86 Hose - Oil Filler&gt;Air Guide $21.22

928.110.442.05 Intake 85-86 Hose - Idle Valve&gt;Air Guide $10.10

928.110.174.08 Intake 85-86 Hose - IdleValve&gt;Center Intake $18.76

928.110.432.00 Intake 85-86 Hose - CmCover-Rear&gt;Air Guide $18.54

928.110.014.00 Intake 85-86 Hose - Throttle Body&gt;7-way Tee $3.71

928.110.761.01 Intake 85-86 Hose - Pipe@L-Intake side&gt;Air Guide $10.22

 

Thanks for the replies. I'm going to have to hold out until I get a picture. I've already replaced all the sleeves as well as the seals for the MAF, but several of the oil hoses needed replacing too but I didn't have those new parts at the time. So....functional, non-formed equivalents were "made locally" using hose from the local auto parts store. I want to replace these ASAP with the proper, formed hoses.

I can remember which hoses I need when looking at the intake, but I have no confidence in my ability to order them based solely on the descriptions Mr. Roberts kindly provided.

What I'm looking for is a picture that shows the hoses and their names/part numbers, kind of like this image from Tony's site (except I need it for UNDER the manifold on an 85/86):

 

 

Thanks David! <img src="graemlins/bigok.gif" border="0" alt="[thumbsup]" />