Looking for inj rubber caps and connectors ect
05-13-2007, 01:37 PM
#1
Race Car
Thread Starter
Looking for inj rubber caps and connectors ect
Where can I get rubber boots and connectors for the inj? Also the connectors for the temp 2, Tdc , Temp 1 Ect?
05-13-2007, 01:50 PM
#2
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Mark,
I can come up with the loom including the connectors for the injector rails.
I can also check on the condition of the other connectors on my parts cars.
Roger
I can come up with the loom including the connectors for the injector rails.
I can also check on the condition of the other connectors on my parts cars.
Roger
__________________
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission?
George Layton March 2014
928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission?
George Layton March 2014928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
05-13-2007, 02:01 PM
#3
Inventor
Rennlist Member
Rennlist Member
You can get them from most parts places with these numbers:
Bosch Power Junior Timer kit, terminals, boot, connector - 2 pin (fuel injector)
F - 1 287 013 003
M - 1 287 013 002
(The male is double the price of the female.)
Bosch Power Junior Timer kit, terminals, boot, connector - 2 pin (fuel injector)
F - 1 287 013 003
M - 1 287 013 002
(The male is double the price of the female.)
05-13-2007, 02:14 PM
#4
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Mark,
Would this help?
I have a top loom from an 85 car.
All the connectors are in good condition and all have the spring clips apart from the fuel injection connectors - I assume you have those. All rubber covers are malleable and have no cracks.
This came from a stripped 85 engine that I bought some time ago.
It has been cut from the main loom as you can see in the picture.
$75 plus shipping if it would work for you.
Roger
Would this help?
I have a top loom from an 85 car.
All the connectors are in good condition and all have the spring clips apart from the fuel injection connectors - I assume you have those. All rubber covers are malleable and have no cracks.
This came from a stripped 85 engine that I bought some time ago.
It has been cut from the main loom as you can see in the picture.
$75 plus shipping if it would work for you.
Roger
