New Fuel lines......good for another 20yrs
#17
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Don,
If I sent you a cheque you would have problems cashing it unless you had a UK bank account.
How about Beer as in adult beverage.?
Roger
If I sent you a cheque you would have problems cashing it unless you had a UK bank account.
How about Beer as in adult beverage.?
Roger
__________________
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission? George Layton March 2014
928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission? George Layton March 2014
928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
#18
Drifting
Join Date: Sep 2004
Location: Live Music Capital of the World - Austin, Texas
Posts: 2,044
Likes: 0
Received 0 Likes
on
0 Posts
Of course, you also replaced those eight little two-inchers from the rails to the injectors did you? When I replace mine the hoses at the back of the engine weren't too bad but the injector hoses all crumbled upon touch.
#19
Rennlist Member
Originally Posted by ROG100
Don,
If I sent you a cheque you would have problems cashing it unless you had a UK bank account.
How about Beer as in adult beverage.?
Roger
If I sent you a cheque you would have problems cashing it unless you had a UK bank account.
How about Beer as in adult beverage.?
Roger
Beer is Excellent ! ! !
#20
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Don S,
Same EFI hose for the injectors as well.
I need to put a kit together for the pre 85 cars as well.
Way Way toooo busy at the moment 8>)
Same EFI hose for the injectors as well.
I need to put a kit together for the pre 85 cars as well.
Way Way toooo busy at the moment 8>)
#23
Rennlist Member
Hey Roger!
Don't forget to anounce it on the board when you get around to put a kit for the pre-85's together...I am in no rush, but eventually will need them ;-)
Don't forget to anounce it on the board when you get around to put a kit for the pre-85's together...I am in no rush, but eventually will need them ;-)
#24
Nordschleife Master
Originally Posted by the flyin' scotsman
Ryan...........thats the return line that exits from the regulator.
#26
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
"Is the hose labled #6 also included in the kit?"
Yes, It is the only Porsche one that is.
"Are there no kits for 84 vintages and earlier?"
Yes there will be - give me a couple of days to sort out what I need.
I have a 78, 80, 82 and 84 so I will start looking.
Yes, It is the only Porsche one that is.
"Are there no kits for 84 vintages and earlier?"
Yes there will be - give me a couple of days to sort out what I need.
I have a 78, 80, 82 and 84 so I will start looking.
#27
Addict
Rennlist Member
Rennlist Member
Join Date: Oct 2003
Location: New York
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
Roger,
Are your replacement fuel hoses all rubber or a polamide/rubber combo or other?
Also, are they resistant to ozone and ethanol/methanol fuels? Thanks.
I was just looking around ebay and found all kinds of combos: fluroelastomer wrapped with polyester and CSM; nitrile wrapped in fibre and hypalon; nitrile wrapped in polyester with a nitrile/PVC blend cover, etc.
This stuff also looks interesting:
http://cgi.ebay.com/ebaymotors/Goody...38529601QQrdZ1
Are your replacement fuel hoses all rubber or a polamide/rubber combo or other?
Also, are they resistant to ozone and ethanol/methanol fuels? Thanks.
I was just looking around ebay and found all kinds of combos: fluroelastomer wrapped with polyester and CSM; nitrile wrapped in fibre and hypalon; nitrile wrapped in polyester with a nitrile/PVC blend cover, etc.
This stuff also looks interesting:
http://cgi.ebay.com/ebaymotors/Goody...38529601QQrdZ1
Last edited by Flott Leben; 06-19-2007 at 12:20 PM.
#28
Addict
Rennlist Member
Rennlist Member
Originally Posted by Flott Leben
Roger,
Are your replacement fuel hoses all rubber or a polamide/rubber combo or other?
Also, are they resistant to ozone and ethanol/methanol fuels? Thanks.
I was just looking around ebay and found all kinds of combos: fluroelastomer wrapped with polyester and CSM; nitrile wrapped in fibre and hypalon; nitrile wrapped in polyester with a nitrile/PVC blend cover, etc.
This stuff also looks interesting:
http://cgi.ebay.com/ebaymotors/Goody...38529601QQrdZ1
Are your replacement fuel hoses all rubber or a polamide/rubber combo or other?
Also, are they resistant to ozone and ethanol/methanol fuels? Thanks.
I was just looking around ebay and found all kinds of combos: fluroelastomer wrapped with polyester and CSM; nitrile wrapped in fibre and hypalon; nitrile wrapped in polyester with a nitrile/PVC blend cover, etc.
This stuff also looks interesting:
http://cgi.ebay.com/ebaymotors/Goody...38529601QQrdZ1
Harvey
#29
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
My hoses are EFI rubber hoses - more detail on the other thread.
No problem on the size as the imperial size is only a few thou different to the metric.
No problem on the size as the imperial size is only a few thou different to the metric.