"Post your A$$" Photo
03-14-2007 | 10:56 PM
#107
Three Wheelin'
Joined: Mar 2006
Posts: 1,489
Likes: 1
From: Happy To Be Home in Sumter, SC
Originally Posted by mcholdfast
That is a pic from before the SITM incident last year. I noticed that the rear bumper cover was trimmed around the pipes. I'm not sure why it was done that way. It has all been replaced now but I don't have a recent butt pic to post.
03-15-2007 | 01:16 AM
#109
Thread Starter
928 Addict
Rennlist Member
Rennlist Member
Joined: Nov 2001
Posts: 1,741
Likes: 1
From: IN BETWEEN A FROZEN CONCOCTION AND INDECISION
Fellow Shark owners...we should stand tall and be counted...for our A$$es are among the best!!!
bigs...I hear you spend most of your time grooming the 'front' lines...but that A$$ kicks
Keep em cumming people...perhaps we can also creat the first 'Shark A$$" puzzle...limited edition of course.
bigs...I hear you spend most of your time grooming the 'front' lines...but that A$$ kicks
Keep em cumming people...perhaps we can also creat the first 'Shark A$$" puzzle...limited edition of course.
03-15-2007 | 01:30 AM
#110
Cottage Industry Sponsor
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Joined: Oct 2001
Posts: 25,784
Likes: 150
From: Silly Valley, CA
Originally Posted by mcholdfast
I lied. Thanks to BrendanC's post on another thread, I found an after resto *** pic I had forgotten about.
Your hatch seems to have the same problem as mine - the rubber bumpers have to be out far in order to keep the hatch from rattling, and as a result, the gap between bumper cover and hatch is way big. Typically this is caused by the white plastic latch piece in the hatch lock - and sometimes the hatch lock housing is cracked.
Also your left bumperette is much lower than the right one. But now the exhaust is nicely centered in its cutout, as it should be.
Details, Details. I happen to see most of them. Can you believe what a pain it is to live that way?
03-15-2007 | 09:04 AM
#112
Advanced
Joined: May 2006
Posts: 89
Likes: 0
From: Leiderdorp, the Nederlands ; )
Originally Posted by zaner
In the immortal words of Sir Mix Alot " I like big butts and i can not lie" 
Could you post another picture? please
If someone else asked this before me sorry but my internet connection is so slow here (it took 5 min for the first page to load : (
03-15-2007 | 09:48 AM
#113
Three Wheelin'
Joined: Mar 2006
Posts: 1,489
Likes: 1
From: Happy To Be Home in Sumter, SC
Originally Posted by Nicole
Should I say it or not...?
Your hatch seems to have the same problem as mine - the rubber bumpers have to be out far in order to keep the hatch from rattling, and as a result, the gap between bumper cover and hatch is way big. Typically this is caused by the white plastic latch piece in the hatch lock - and sometimes the hatch lock housing is cracked.
Also your left bumperette is much lower than the right one. But now the exhaust is nicely centered in its cutout, as it should be.
Details, Details. I happen to see most of them. Can you believe what a pain it is to live that way?
Your hatch seems to have the same problem as mine - the rubber bumpers have to be out far in order to keep the hatch from rattling, and as a result, the gap between bumper cover and hatch is way big. Typically this is caused by the white plastic latch piece in the hatch lock - and sometimes the hatch lock housing is cracked.
Also your left bumperette is much lower than the right one. But now the exhaust is nicely centered in its cutout, as it should be.
Details, Details. I happen to see most of them. Can you believe what a pain it is to live that way?
This pic was taken just after the repaint was done. We installed all new rubber and the the hatch was almost impossible to close with the new seals. We had to install shims under the top latch to avoid having to slam the hatch closed. After a week or so the seals softened up and I was able to remove the shims and close the hatch with normal force. It may not be perfect now but it's better than it was in the photo.Oh yeah, I added a few pounds of air to the left rear tire so the bumperettes line up just right now.
03-18-2007 | 02:27 AM
#118
Thread Starter
928 Addict
Rennlist Member
Rennlist Member
Joined: Nov 2001
Posts: 1,741
Likes: 1
From: IN BETWEEN A FROZEN CONCOCTION AND INDECISION
Ok...last call for your ars's to be posted...It's dropped to page 4 so I'm guessing eveyone thats interested in being part of the big a$$ photo has just about posted their wears!!!
I'll let this sit a few more days just incase someone's been on vacation...Randy V...hey...where's your ars!!! Did you post?
I'll let this sit a few more days just incase someone's been on vacation...Randy V...hey...where's your ars!!! Did you post?
03-18-2007 | 02:43 AM
#119
Addict
Rennlist Member
Rennlist Member
Joined: Feb 2003
Posts: 5,988
Likes: 35
From: Northwest
Originally Posted by bigs
Stepwise more and more revealing!
Harvey
03-18-2007 | 02:59 AM
#120
Shark Slayer
Rennlist Member
Rennlist Member
Joined: Nov 2006
Posts: 2,215
Likes: 1
From: 'BETWEEN NORTH STAR BOROUGH...& THE CONCH REPUBLIC'
Originally Posted by tdelarm
Ok...last call for your ars's to be posted...It's dropped to page 4 so I'm guessing eveyone thats interested in being part of the big a$$ photo has just about posted their wears!!!
I'll let this sit a few more days just incase someone's been on vacation...Randy V...hey...where's your ars!!! Did you post?
I'll let this sit a few more days just incase someone's been on vacation...Randy V...hey...where's your ars!!! Did you post?
Heard his 'ars' was iwrapped up n lycra. . . or was it spandex . . no, it was. .
