gbarron

Okay, I am overhauling the top end of my 86.5 and in PET it lists this hose for my engine VIN (it does not show it in the picture, P/N 928.107.603.00) but when I received it I cannot for the life of me figure out where it goes...hopefully someone out there recognizes it?? Maybe it's an update to replace some individual hoses??

bgrabner

Hey gbarron - that hose connects to left side of the oil fill turret as well as to several other lines - its #5 as shown in the picture below. Although the pic is from an S4, I am pretty positive your 86.5 will have the same hose in the same location.

PorKen

Looks like that funky hose replaces 19-23, below.



I dumped that/those hoses, along with the vapor recovery tank.

gbarron

Thanks for the replies guys, but this hose will not fit in that area. It's too small/short to replace the items listed in the parts picture 19-23 on my 86.5. Maybe the hose was labeled incorrectly from Porsche?

bgrabner

I would bet that your 86.5 intake is a bit different from my 87, that tube definitely fits my 87. Maybe you just got the wrong part shipped? Where did you get it from?

edco

Hey gbarron,

Bill is right I replaced this hose on my 88 S4 when I did the intake, 928 SPECIALISTS list it as - Hose - Throttle Body >Oil Fill >Charcoal Vent 87-95

I don’t see it listed on the 85-86 Intake Removal/Refresh Kit for your car. It looks to be #5 in the photo above, running back under the intake and to a small charcoal canister.

gbarron

Okay, that makes sense...looks like my car is 1/2 a year to young to use this hose! Back for credit!