Lifter Noise
#16
Pro
Thread Starter
Hi Kirt,
No it is the same noise... I think the frequency of the noise suggest against a Crank/rotational assemby problem. DO rod knocks make sounds onceor twice per revolution?
I will try to make it to devek but my mom is coming to visit, I was supposed to go to the opera in the park and I am leavingtown for all of next week... but I will probably show for a little bit.
Great I will definitely bring my eprom burner...
Loren
No it is the same noise... I think the frequency of the noise suggest against a Crank/rotational assemby problem. DO rod knocks make sounds onceor twice per revolution?
I will try to make it to devek but my mom is coming to visit, I was supposed to go to the opera in the park and I am leavingtown for all of next week... but I will probably show for a little bit.
Great I will definitely bring my eprom burner...
Loren
#18
Pro
Thread Starter
I have had three people who are 928 mechanics listen and they all seem to think it is a lifter...
I figure that I will have to pull the cams out and renew the lifters to fix this... so to fix a little noise it is going to get pretty expensive...
most have said to just drive it...
But I am locating some donor motors to start working with I have a new bottom end on the way...
LO
I figure that I will have to pull the cams out and renew the lifters to fix this... so to fix a little noise it is going to get pretty expensive...
most have said to just drive it...
But I am locating some donor motors to start working with I have a new bottom end on the way...
LO
#20
Three Wheelin'
Originally Posted by Ron_H
I have a lifter noise but it goes away as the engine warms. I presume this is normal. I hope it is normal. This other stuff is scaring me.
#21
Instructor
Join Date: Aug 2006
Location: Porterville, CA
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
Sounds like a lifter to me. I'm not a porshe expert, but I have ruled out, and diagnosed bottom end issues by removing the plug wires one at a time to that bank. The lack of ignition will usually quiet down the bottom end impact. If it makes no difference, then it is generally valve train related.