Skip Wolfe

Hey guys,

Sorry if this is a ignorant question - I'm not a 928 guy. I have a set of a set of 17x9 Cup2 aftermarket wheels that were on the rear of my '88 951 parts car. They have approximately a 76.2mm offset and needed spacers to fit on my late offset suspension. I have a buddy who is interested in them for the rear of his 928 S4. Any idea if they will fit?

Thanks,

Skip

FlyingDog

They may fit without the spacer but he'd probably want a spacer for looks. The GTS Cup 2s were 55mm offset and came with 35mm spacers.

Jim bailey - 928 International

They will sit in a bit far might need spacers depending on the tire width.The factory GTS wheel is a 55 mm offset most aftermarket are 52 mm so at 76 mm they are about 1/2-3/4 inch more inside toward the lower control arm.

Richard S

Seems you could mount them up front if you wanted 9" at all 4 corners, may need some spacer there too.

Rich