revised revision of interior door panels...
#1
revised revision of interior door panels...
I took off the aluminum - bolt - wood look of the interior of my shaved doors and simplified the doors with steel panels that are painted to match the exterior color... since I have electric poppers, I replaced the handles with buttons and have emergency pulls hidden inside the door pockets.
#6
I have no detailed pictures of the door poppers, as I did not do the install... I understand they were not too difficult except the wiring which needs an active lead from the rear battery... lots of wire.
Rick
Rick
Trending Topics
#8
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
Joined: Jul 2001
Posts: 11,542
Likes: 3
From: Anaheim California
OK now how about making console side covers painted to match ? sure it is a bit retro but might tie in the door panel accent color...This new look sure is much more pleasing to my eye !
#13
Cottage Industry Sponsor
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Joined: Oct 2001
Posts: 25,784
Likes: 150
From: Silly Valley, CA
That's a BIG step ahead, Rick!!!
Now, if I were you, I'd consider removing the wood trim on the door vents, and replacing the console's current wood and metal trim with matching orange trim to tie things together.
Remember: reduce, reduce, reduce. Limit yourself to as few materials and colors as possible!
Now, if I were you, I'd consider removing the wood trim on the door vents, and replacing the console's current wood and metal trim with matching orange trim to tie things together.
Remember: reduce, reduce, reduce. Limit yourself to as few materials and colors as possible!
Last edited by Nicole; 04-13-2006 at 12:00 AM.