Notices
928 Forum 1978-1995
Sponsored by:
Sponsored by: 928 Specialists

wheel fitment question

Thread Tools
 
Search this Thread
 
Old 04-04-2006, 10:06 PM
  #1  
v-tach
Burning Brakes
Thread Starter
 
v-tach's Avatar
 
Join Date: Dec 2001
Location: Brooklyn, NY
Posts: 1,140
Likes: 0
Received 0 Likes on 0 Posts
Default wheel fitment question

will 928--8's-- dish rims fit all four corners of our cars ? one other-- would 993 cup wheels--9's fit all four corners ? looking for nice sizes on 4 corners that i could rotate for the track..
thanks fella's
v-tach
1986.5 --928
Old 04-05-2006, 12:52 AM
  #2  
GlenL
Nordschleife Master
 
GlenL's Avatar
 
Join Date: Jul 2003
Location: Minneapolis, Minnesota
Posts: 7,660
Received 32 Likes on 26 Posts
Default

S4 rears will fit all around.

Other wheels gotta have that big (>50 or 60mm) offset.
Old 04-05-2006, 06:22 AM
  #3  
Vilhuer
Addict
Rennlist Member

 
Vilhuer's Avatar
 
Join Date: Jun 2003
Location: Helsinki, Finland
Posts: 9,378
Likes: 0
Received 60 Likes on 33 Posts
Default

993 Cup II rear winter wheels are 8" and ET70. They are just about only relatively cheaply available 17" factory wheels with enough large ET to fit properly on front of 928. All other Boxster etc. wheels have too small offset to accept much wider rubber than 225. On late models with factory rolled fenders there is little more room and 245 might work with 8" and ET52 or such.

Specialists sell 9.5" Cup wheel which should fit into front with 255 tires. What its it's offset? Must be around 70mm also.



Quick Reply: wheel fitment question



All times are GMT -3. The time now is 10:20 PM.