Now is this cool or what? (cooler!)
#16
Drifting
Thread Starter
Here are a couple of photos of the "support system". Pricing to come after I wake up...
I'm sure I could devise a blender capable supply if there is sufficient demand. How about a blender that pops up from underneath the rear deck right beside the cooler? You'd only have to remove the gas tank...
BTW, the battery bracket is 3/16" aluminum, polished because I was standing near the buffer when I got it done. Them batteries ain't goin' nowhere!
I'm sure I could devise a blender capable supply if there is sufficient demand. How about a blender that pops up from underneath the rear deck right beside the cooler? You'd only have to remove the gas tank...
BTW, the battery bracket is 3/16" aluminum, polished because I was standing near the buffer when I got it done. Them batteries ain't goin' nowhere!
#18
Drifting
Thread Starter
Ok, I can build multiple "Accessory support systems" for $189.95 each if you want them. Install will be extra and if you want, we will travel to your location to install them. (travel not included in price and we must test drive all 928's afterwards to insure proper operation at redline!)
#19
Owns the Streets
Needs Camber
Lifetime Rennlist
Member
Needs Camber
Lifetime Rennlist
Member
Won't need to sacrifice gas tank for blender.
Remove collapsible (but practically impossible to return to enclosure) spare.
Mount blender base to the spare floor.
Extend rear A/C chiller tubes and run couple coils around the spare wheel.
Make nice metal rack around perimeter of spare tire well to
hold glasses. (Now chilled)
Place blender pitcher sideways over base.
Might need to create false floor on rear hatch to clear the sideways blender pitcher.
Now that would be a "trick" install. If one doesn't have a sub in the
spare wheel well already.
Ernest (NYC) "No ossifer. That's not a blender in the rear hatch."
Remove collapsible (but practically impossible to return to enclosure) spare.
Mount blender base to the spare floor.
Extend rear A/C chiller tubes and run couple coils around the spare wheel.
Make nice metal rack around perimeter of spare tire well to
hold glasses. (Now chilled)
Place blender pitcher sideways over base.
Might need to create false floor on rear hatch to clear the sideways blender pitcher.
Now that would be a "trick" install. If one doesn't have a sub in the
spare wheel well already.
Ernest (NYC) "No ossifer. That's not a blender in the rear hatch."
#21
Rennlist Member
How about a PTO off the rear axle with a chain drive to a sprocket driven blender?
Damn, now that would mix a drink or......concrete?
Pretty cool still.
Damn, now that would mix a drink or......concrete?
Pretty cool still.