For Sale: Non Intercooled Twin-Screw System
05-13-2005, 07:21 PM
#1
Drifting
Thread Starter
Join Date: Feb 2002
Location: Redondo Beach, CA>>>>Atlanta,GA
Posts: 2,015
Likes: 0
Received 0 Likes
on
0 Posts
For Sale: Non Intercooled Twin-Screw System
$4476
I have a non intercooled twin-screw system that is ready to go minus the bypass valve which I'll get next week.
I have a customer that was confused about the 2 diffetent systems and what they actually wanted was the Jag/Eaton 112 setup instead of the twin-screw.
I found this out after I had bought a twin-screw and almost boxed it up for him. No worries but I do need to sell this one now.
It will be shipped at 5 psi. This will fit '85+'86 US 32V. It will also fit 87+ S4. NOTE that if oyu have an S4 YOU will need to buy #30 injectors ($219.00), an 85-86 fuel pressure regulator(~$85) and a '85-'86 throttle body (~$100.00).
The price for this one is now $5495.00. Since I was only planning to get the old price of $4995 - $528 as one of the discounted ones from the DEVEK event, I'll take $4476 for it but only through Monday afternoon 5:00 EST. After that I'll keep it and sell it at the normal price.
Review this product by clicking HERE
Review the terms of sale at the bottom of the page referenced above. However note these changes. Full payment is due by Wed, May 18th to get the $4476 price. The system will be shipped within 48hrs of receipt of payment since it's already pretty much ready to go. And this product is only intended for 928 enthusaist hobby mechanics, or professional technicians, that can seek help with technical issues by fellow owners via the 928 SUPERMODEL Forum. All directions are displayed at www.928supermodel.com/forums. Print them out if you want a hard copy. No technical question/e-mail/phone call will be answered until it is first posted in the forum at www.928supermodel.com/forums
Let there be no confusion. Make a good decision.
I will only sell this to someone that has done a lot of research already and has been preparing to buy one of my SC systems. If you have a ton of unanswered questions still, or if you'll have trouble paying for it then it's probably not for you.
It is the one on the right that is for sale. The one on the left is on the way to a shop owner in Ohio. BTW If you are in Ohio area and need a shop to do an install for you then e-mail me for his info.
E-mail me at andy@928supermodel.com
Andy K
I have a non intercooled twin-screw system that is ready to go minus the bypass valve which I'll get next week.
I have a customer that was confused about the 2 diffetent systems and what they actually wanted was the Jag/Eaton 112 setup instead of the twin-screw.
I found this out after I had bought a twin-screw and almost boxed it up for him. No worries but I do need to sell this one now.
It will be shipped at 5 psi. This will fit '85+'86 US 32V. It will also fit 87+ S4. NOTE that if oyu have an S4 YOU will need to buy #30 injectors ($219.00), an 85-86 fuel pressure regulator(~$85) and a '85-'86 throttle body (~$100.00).
The price for this one is now $5495.00. Since I was only planning to get the old price of $4995 - $528 as one of the discounted ones from the DEVEK event, I'll take $4476 for it but only through Monday afternoon 5:00 EST. After that I'll keep it and sell it at the normal price.
Review this product by clicking HERE
Review the terms of sale at the bottom of the page referenced above. However note these changes. Full payment is due by Wed, May 18th to get the $4476 price. The system will be shipped within 48hrs of receipt of payment since it's already pretty much ready to go. And this product is only intended for 928 enthusaist hobby mechanics, or professional technicians, that can seek help with technical issues by fellow owners via the 928 SUPERMODEL Forum. All directions are displayed at www.928supermodel.com/forums. Print them out if you want a hard copy. No technical question/e-mail/phone call will be answered until it is first posted in the forum at www.928supermodel.com/forums
Let there be no confusion. Make a good decision.
I will only sell this to someone that has done a lot of research already and has been preparing to buy one of my SC systems. If you have a ton of unanswered questions still, or if you'll have trouble paying for it then it's probably not for you.
It is the one on the right that is for sale. The one on the left is on the way to a shop owner in Ohio. BTW If you are in Ohio area and need a shop to do an install for you then e-mail me for his info.
E-mail me at andy@928supermodel.com
Andy K
05-14-2005, 07:10 PM
#2
Drifting
Thread Starter
Join Date: Feb 2002
Location: Redondo Beach, CA>>>>Atlanta,GA
Posts: 2,015
Likes: 0
Received 0 Likes
on
0 Posts
I should have said a shop in New Jersey above instead of Ohio. I don't know of any shop in Ohio that could do an install.
Also this system will use up the last set of pullies that is not claimed by deposit or promised for trade. It is be the last system that will be available indefinately. Unless I can find a way to make 1 or 2 setups at a time or sell a few of them at once then I doubt I'll make any more.
Andy K
Edit: I put it up on e-bay because financing is available through pay-pal. I don't know the details of that but click here for the listing
Also this system will use up the last set of pullies that is not claimed by deposit or promised for trade. It is be the last system that will be available indefinately. Unless I can find a way to make 1 or 2 setups at a time or sell a few of them at once then I doubt I'll make any more.
Andy K
Edit: I put it up on e-bay because financing is available through pay-pal. I don't know the details of that but click here for the listing
Last edited by GoRideSno; 05-14-2005 at 08:48 PM.
