Starter leads?
04-26-2005 | 12:17 PM
#1
Thread Starter
Racer
Joined: Nov 2003
Posts: 330
Likes: 1
From: hong kong
Starter leads?
Hi All
In my quest to finish all my restoration work I have come to a stumbling block. While trying to but the starter back on I do not know where the small gage wire attaches to the back of the starter.There are three wires which attach to the back I know where the two heavy gage wires attach but the third has me stumped. There are two possible places for the small wire to attach with a machining screw which is the correct location? any help would be greatly appreciated.
Regards Dan 1990 928GT
P.S. here is a picture of the back of the starter the small wire goes to one of the square brass attachment points and it gets held on with a machine screw I just don't know which one!
In my quest to finish all my restoration work I have come to a stumbling block. While trying to but the starter back on I do not know where the small gage wire attaches to the back of the starter.There are three wires which attach to the back I know where the two heavy gage wires attach but the third has me stumped. There are two possible places for the small wire to attach with a machining screw which is the correct location? any help would be greatly appreciated.
Regards Dan 1990 928GT
P.S. here is a picture of the back of the starter the small wire goes to one of the square brass attachment points and it gets held on with a machine screw I just don't know which one!
Last edited by pasa; 04-26-2005 at 02:06 PM.
