Nostromo

Hi!

The name of the paintstripper I mentioned before is Gardostrip 7084 and it's made in UK.

Unfortunately, according my further tests, this one is too mild for our purposes. It worked quite fine when powdercoat layer is very thin. When the layer is coming thicker, stripper just doesn't bite without several treatments.

Also, it only affected against cam covers and intake manifold side plates. When I tried it on intake manifold, there was absolutely no effect at all.

Giovanni

I used Kleen stripper bought at Lowes. I had to use it 2x on the intake but it was effective (washed it off with a powerwasher).