Progress on Replacement Engine Wiring Harness
#16
Rennlist Member
Originally Posted by Quick Carl
JP - I know severl sites that have a few Bosch/AMP connectors for sale.
Do you know anybody who has access to the entrie line of Bosch or AMP connectors?
Do you know anybody who has access to the entrie line of Bosch or AMP connectors?
I got dizzy trying to source the two-pin plugs for the '79 and could not find the correct original manufacturer number (AMP), and bought my replacement connector from an auto supply house. However, a good start on your quest might be:
Allied Electronics, Inc.
800-433-5700 US
http://www.alliedelec.com/
#17
Official Rennlist
Borat Impersonator
Rennlist Member
Borat Impersonator
Rennlist Member
hey carl, check out http://eagleday.com/ampconnectors.html i think they have some of the connectors you're looking for.
#20
Rennlist Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Hi Carl,
I am glad to see someone taking the time to make the disappearing NLA K-jet harness.
>The NEXT wiring harness we feel is endangering our species is the injector harness for the L-Jet
>cars. I get a lot of emails of misfiring or non-firing injectors attributed to this harness that is dying.
>The injector harness goes through the firewall to the LH and up into the dash too. Its a bear to
>replace - if a replacement was available - and it is not.
Just a heads up, someone may have given you incorrect info. The L-Jectronic harness is still available. I ordered one for someone yesterday at 4pm and it arrived at noon today. Brand new in the box from Porsche for only $358.59!
Sure is purdy and looks to have upgraded heat sleeving etc.
I am glad to see someone taking the time to make the disappearing NLA K-jet harness.
>The NEXT wiring harness we feel is endangering our species is the injector harness for the L-Jet
>cars. I get a lot of emails of misfiring or non-firing injectors attributed to this harness that is dying.
>The injector harness goes through the firewall to the LH and up into the dash too. Its a bear to
>replace - if a replacement was available - and it is not.
Just a heads up, someone may have given you incorrect info. The L-Jectronic harness is still available. I ordered one for someone yesterday at 4pm and it arrived at noon today. Brand new in the box from Porsche for only $358.59!
Sure is purdy and looks to have upgraded heat sleeving etc.
__________________
David Roberts
2010 Jaguar XKR Coupe - 510HP Stock - Liquid Silver Metallic
928 Owners Club Co-Founder
Rennlist 928 Forum Main Sponsor
www.928gt.com
928 Specialists on Facebook - 928Specialists
Sharks in the Mountains on Facebook - 928SITM
David Roberts
2010 Jaguar XKR Coupe - 510HP Stock - Liquid Silver Metallic
928 Owners Club Co-Founder
Rennlist 928 Forum Main Sponsor
www.928gt.com
928 Specialists on Facebook - 928Specialists
Sharks in the Mountains on Facebook - 928SITM
#21
Developer
Thread Starter
DR - Excellent! I am glad to hear that and will tell my customers. I cannot make it for that price. $359.00 is CHEAP.
My recommendation if I had an 80 to 84 LJet - buy one of these NOW while they are still available. Because either they are pulling from old inventory, or they haven't decided yet to stop having them made. But it will not last forever...
My recommendation if I had an 80 to 84 LJet - buy one of these NOW while they are still available. Because either they are pulling from old inventory, or they haven't decided yet to stop having them made. But it will not last forever...
#22
Developer
Thread Starter
DR - Under further inspection of your picture - that looks to be the Injector Wiring harness, not the Engine Wiring Harness?
If it is the LJet injector harness I am still very surprised (and pleased) to hear it is available.
Do you know if the engine harness (from 14-pin connector on RF fender into the motor) is still available? I think not, but please surprise me!
If it is the LJet injector harness I am still very surprised (and pleased) to hear it is available.
Do you know if the engine harness (from 14-pin connector on RF fender into the motor) is still available? I think not, but please surprise me!
#23
Rennlist Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Hi Carl,
>DR - Excellent! I am glad to hear that and will tell my customers. I cannot make it for that price. >$359.00 is CHEAP.
To be very honest I am surprised that Porsche's price isn't a lot higher!!
>My recommendation if I had an 80 to 84 LJet - buy one of these NOW while they are still available.
I agree, I am keeping back one for myself!
>Because either they are pulling from old inventory, or they haven't decided yet to stop having them >made.
I have seen a lot of old inventory from Porsche over the years, and this one looks really, really new!
> But it will not last forever...
OH YEAH, no doubt about it!!
Have a great 928 weekend,
>DR - Excellent! I am glad to hear that and will tell my customers. I cannot make it for that price. >$359.00 is CHEAP.
To be very honest I am surprised that Porsche's price isn't a lot higher!!
>My recommendation if I had an 80 to 84 LJet - buy one of these NOW while they are still available.
I agree, I am keeping back one for myself!
>Because either they are pulling from old inventory, or they haven't decided yet to stop having them >made.
I have seen a lot of old inventory from Porsche over the years, and this one looks really, really new!
> But it will not last forever...
OH YEAH, no doubt about it!!
Have a great 928 weekend,
#24
Rennlist Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Carl,
It is this one you described earlier in this thread ...
>The NEXT wiring harness we feel is endangering our species is the injector harness for the L-Jet
>cars. I get a lot of emails of misfiring or non-firing injectors attributed to this harness that is dying.
>The injector harness goes through the firewall to the LH and up into the dash too. Its a bear to
>replace - if a replacement was available - and it is not.
I haven't ordered the Front engine harness in a while, but will check into it on Monday..last I checked they were around $189 as they are not near as complex as the Fuel Injection harness.
It is this one you described earlier in this thread ...
>The NEXT wiring harness we feel is endangering our species is the injector harness for the L-Jet
>cars. I get a lot of emails of misfiring or non-firing injectors attributed to this harness that is dying.
>The injector harness goes through the firewall to the LH and up into the dash too. Its a bear to
>replace - if a replacement was available - and it is not.
I haven't ordered the Front engine harness in a while, but will check into it on Monday..last I checked they were around $189 as they are not near as complex as the Fuel Injection harness.
#25
FWIW, I've got an 'extra' 85 top harness that was completely reworked and in nice shape for sale ($100)... just let me know... IMO, it's pretty impossible to find a good used front harness, they seem to get trashed the worst... might be a good one to think about also...
regards!
regards!
#26
Wow! This whole thread is awesome. You guys are incredibly talented. One more of many reasons to always check Rennlist before doing anything to your 928!
Thanks for the Continuing Professional Education!
Cheers,
Dave
Thanks for the Continuing Professional Education!
Cheers,
Dave
#27
I just bought some 2 pin connector from" Writh" and they were AMP. Also there is a web site that has the two and three pin AMP connectors, run a search using AMP connectors.As I recall the three pin was $27. I was looking for a three pin connector with a trianglur end found on the interior harness an discovered that Porsche sill has it availible.
I have come to dislike aftermarket radio and alarm installers, for they butcher the wiring.
I have come to dislike aftermarket radio and alarm installers, for they butcher the wiring.
#28
Nordschleife Master
Join Date: Sep 2004
Location: Not close enough to VIR.
Posts: 9,429
Likes: 0
Received 2 Likes
on
2 Posts
Carl, I assume you've tried searching (AMP) Tyco-Electronics website for the connectors. If not, here's a link to the automotive powertrain connectors. http://catalog.tycoelectronics.com/T...4998&LG=1&I=13
#29
Developer
Thread Starter
Thanks for all your leads, you guys.
So far, this one had been the most fruiful: http://eagleday.com/ampconnectors.html
...and I have the connectors I was missing now on order.
But I want to hear from Dave Roberts first - to confirm that the OEM wiring harness is not first still available!
So far, this one had been the most fruiful: http://eagleday.com/ampconnectors.html
...and I have the connectors I was missing now on order.
But I want to hear from Dave Roberts first - to confirm that the OEM wiring harness is not first still available!
#30
Nordschleife Master
Join Date: Sep 2004
Location: Not close enough to VIR.
Posts: 9,429
Likes: 0
Received 2 Likes
on
2 Posts
On the site I linked, I found some AMP part numbers for what look like the injector connectors and maybe the connectors to the LH box.
Edited to add: I think these are the injector connectors.
http://catalog.tycoelectronics.com/T...,169186,169196
Edited to add: I think these are the injector connectors.
http://catalog.tycoelectronics.com/T...,169186,169196
Last edited by FlyingDog; 02-26-2005 at 01:37 AM.