Opinion on Wheels
#1
Rennlist Member
Thread Starter
Opinion on Wheels
I'm down to 2 sets to pick from for my shark. I was hoping to get some honest opinions on which would get the most looks. I need to buy ASAP before they get sold.
One is an Antera and the other is the 993 Cup. Both are 17".
http://forums.rennlist.com/upload/ad_1_b.jpg
http://forums.rennlist.com/upload/parts.5936.1.jpg
One is an Antera and the other is the 993 Cup. Both are 17".
http://forums.rennlist.com/upload/ad_1_b.jpg
http://forums.rennlist.com/upload/parts.5936.1.jpg
#2
Just an opinion... I think the Cup2 wheels are appropriate for the car.
They are clean but have add an aggressive posture to the car. I have poured through about 100 set of wheels and a found a few other sets that I liked... just not on the 928.
From the photo the antera seems bulgy... besides if you change your mind some will buy your C2's
They are clean but have add an aggressive posture to the car. I have poured through about 100 set of wheels and a found a few other sets that I liked... just not on the 928.
From the photo the antera seems bulgy... besides if you change your mind some will buy your C2's
#3
Pro
Join Date: Nov 2001
Location: Walnut Creek, California
Posts: 623
Likes: 0
Received 0 Likes
on
0 Posts
I think the Antera wheels add too much of a rounded element to the car. The Cup wheels would make a classy addition to your already very clean 928. Just my opinion...
Trending Topics
#9
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
The 993 style wheel is more readily available and likely to be in production in the future which is important should you need a replacement wheel in the future ...There are many people with old mesh BBS RS wheels who have only two or three of what was once a $3,000 set of wheels at one time. And no one has replacement wheels or parts!
#11
Rennlist Member
Thread Starter
Thanks all.... I only had a reserve about the cups because one is less shiny than the others. Looks like someone may have painted it and did a poor job. It has a rough finish and the others are smooth obviously the stock finish.