Weissach Bamberg Digital Radio
#1
Thread Starter
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Joined: Jan 2003
Posts: 16,839
Likes: 897
From: Double Oak, TX
Weissach Bamberg Digital Radio
One of my first tasks when I get the Weissach is to return the radio and speaker system to stock.
I need a working (good condition) Blaupunkt Bamberg digital radio and memory control unit plus the amplifier.
Anyone out there got such a beast?
Please PM me with any information.
Thanks,
Roger
I need a working (good condition) Blaupunkt Bamberg digital radio and memory control unit plus the amplifier.
Anyone out there got such a beast?
Please PM me with any information.
Thanks,
Roger
__________________
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission? George Layton March 2014
928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission? George Layton March 2014
928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
#4
Administrator - "Tyson"
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Joined: Aug 2001
Posts: 1,627
Likes: 2,237
From: Up Nort
I was hoping you bought Jessa's since I'm going to copy her speaker grill design. Would have been easier to make you an offer.
What part of the speakers are you changing? Just curious what you've found to fit.
What part of the speakers are you changing? Just curious what you've found to fit.
#5
Thread Starter
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Joined: Jan 2003
Posts: 16,839
Likes: 897
From: Double Oak, TX
Hi Hacker,
I'm **** about keeping my cars as close to stock as possible - so I will not be making changes to the speakers.
I was at a 928 meeting this morning and we were talking about Jessa's car.
Scott Carlson was talking about those speaker enclosures and how he used to make them.
Hope he chimes in here.
If he does not I will contact him seperatly for you.
Best,
Roger
I'm **** about keeping my cars as close to stock as possible - so I will not be making changes to the speakers.
I was at a 928 meeting this morning and we were talking about Jessa's car.
Scott Carlson was talking about those speaker enclosures and how he used to make them.
Hope he chimes in here.
If he does not I will contact him seperatly for you.
Best,
Roger
#6
Cottage Industry Sponsor
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Joined: Oct 2001
Posts: 25,784
Likes: 150
From: Silly Valley, CA
Roger: I just wrote a response in your other thread...
At Sharktoberfest I noticed that 928 International has a stack of radios in their warehouse. You might want to call them and see, if they have the one you are looking for. I'm not familiar with the Bamberg, so I can't tell you, if I have seen one there...
At Sharktoberfest I noticed that 928 International has a stack of radios in their warehouse. You might want to call them and see, if they have the one you are looking for. I'm not familiar with the Bamberg, so I can't tell you, if I have seen one there...
#7
82 still has the non-DIN opening doesn't it? You have to change the console trim to fit the square radios?
...
There's a Blaupunkt CR-3001 supposedly from an '82, on eBay:
clic pic for ebay listing
...
I had a '69 Eldorado for a while, which I spent hours and $$ to find a factory FM radio and replaced the dash which had been hacked to fit a new style radio. Sure enough, one week after I sold it, the fellow hacked open the dash and put in a new style radio!
...
There's a Blaupunkt CR-3001 supposedly from an '82, on eBay:
clic pic for ebay listing
...
I had a '69 Eldorado for a while, which I spent hours and $$ to find a factory FM radio and replaced the dash which had been hacked to fit a new style radio. Sure enough, one week after I sold it, the fellow hacked open the dash and put in a new style radio!
Trending Topics
#8
Thread Starter
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Joined: Jan 2003
Posts: 16,839
Likes: 897
From: Double Oak, TX
Porken,
Yes I am watching this for the amp.
The system was fitted to the 92 as the base setup.
However I beleive the amp was an option acording to PET.
Thanks,
Roger
Yes I am watching this for the amp.
The system was fitted to the 92 as the base setup.
However I beleive the amp was an option acording to PET.
Thanks,
Roger
#9
Administrator - "Tyson"
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Joined: Aug 2001
Posts: 1,627
Likes: 2,237
From: Up Nort
Originally Posted by ROG100
Hi Hacker,
I'm **** about keeping my cars as close to stock as possible - so I will not be making changes to the speakers.
I'm **** about keeping my cars as close to stock as possible - so I will not be making changes to the speakers.
I already slightly damaged the door panel trying different speakers (leather is no longer smooth over the speaker) an enclosure or a newer door panel are my options. The newer door panel will require cutting into the door, no thanks.
Originally Posted by ROG100
I was at a 928 meeting this morning and we were talking about Jessa's car.
Scott Carlson was talking about those speaker enclosures and how he used to make them.
Hope he chimes in here.
If he does not I will contact him seperatly for you.
Best,
Roger
Scott Carlson was talking about those speaker enclosures and how he used to make them.
Hope he chimes in here.
If he does not I will contact him seperatly for you.
Best,
Roger
#10
H-P,
I'll be glad to help design the enclosures for you. Fabrication is easy and requires simple wood working tools like a sabre saw.
Depending on how deep you want the enclosure, door steel modification may be necessary.
I make it to Milwaukee on a regular basis. We can connect up some time and get this drawn out.
Next time I'm heading to MKE, I'll drop yo a line.
Scott
I'll be glad to help design the enclosures for you. Fabrication is easy and requires simple wood working tools like a sabre saw.
Depending on how deep you want the enclosure, door steel modification may be necessary.
I make it to Milwaukee on a regular basis. We can connect up some time and get this drawn out.
Next time I'm heading to MKE, I'll drop yo a line.
Scott