Function of Center Vent Microswitch
#1
Rennlist Member
Thread Starter
Join Date: Sep 2003
Location: Mansfield, TX
Posts: 669
Likes: 0
Received 0 Likes
on
0 Posts
![Question](https://rennlist.com/forums/images/icons/icon5.gif)
I searched the archives and the WSM, and I am still unclear exactly what is the function of the microswitch behind the center vent. It engages when the vent is fully closed. What does this cause to happen?
Thanks as always.
Jay
Thanks as always.
Jay
#2
Administrator - "Tyson"
Lifetime Rennlist
Member
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Your lucky it's broken on your car. That's the ultra rare driver's side ejector seat. It doesn't work so well with the size sun-roof these cars have. If you don't even have a sun-roof, pull the relay just in case.
Works much better on the 944's.
Works much better on the 944's.
#4
Rennlist Member
Thread Starter
Join Date: Sep 2003
Location: Mansfield, TX
Posts: 669
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hacker.... the PO disconnected the ejector seat from the center vent and re-wired it to the kickdown switch to take care of valet parking guys that abused the privilege of driving the 928......