Porsche Swap Meet 2022
#31
Rennlist Member
I Drew doesn't have one, I have one for '87-95 (both front and rear). May not be perfect, but easily repaired to function well. Pix can be available if you need them.
Gary Knox
Ed, Sorry to hear you won't be able to make it.
Gary Knox
Ed, Sorry to hear you won't be able to make it.
Last edited by Gary Knox; 04-02-2022 at 12:00 PM.
The following users liked this post:
linderpat (04-04-2022)
#32
Rennlist Member
#33
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Scott, do you see my new listing for my redesigned version of the early 928 Belly Pan?
__________________
ReDesign by FEATHER
by Jerry Feather
Producer for 928 of:
-Hatch Latch Receiver Liner--All Versions
-Replacement Heavy Duty Spare Tire Cover
-Flush Center Console Conversion
-Cowl Cover, Cowl Seal, & Shell Stickers--All versions
(RHD included)
-Aluminum Gas Cap Ratcheting Pawl
ReDesign by FEATHER
by Jerry Feather
Producer for 928 of:
-Hatch Latch Receiver Liner--All Versions
-Replacement Heavy Duty Spare Tire Cover
-Flush Center Console Conversion
-Cowl Cover, Cowl Seal, & Shell Stickers--All versions
(RHD included)
-Aluminum Gas Cap Ratcheting Pawl
#34
Rennlist Member
S4 Intake and air bag FS
I bought the intake with the intention of having it powder coated for the GTS. Plans changed. The invoice from 928 International says " Intake 87 - '89" When I purchased it was known that I intended to put it on the GTS so I will say it should fit up to '95, however please do your research. Asking Firm $300 for the intake, I paid $395 several years ago. This is the "2R" intake, used on all S4s. The air bag is used, purchased last summer from 928 Inter'l for $170, no discount at this time; Price(s) is assumed w/o shipping as I will bring these to Carlisle. Otherwise, I must ask for actual shipping cost to be added.
Last edited by SteveG; 04-12-2022 at 09:11 PM. Reason: add
#35
Rennlist Member
I bought the intake with the intention of having it powder coated for the GTS. Plans changed. The invoice from 928 International says " Intake 87 - '89" When I purchased it was known that I intended to put it on the GTS so I will say it should fit up to '95, however please do your research. Asking $300.
The following users liked this post:
SteveG (04-20-2022)
#36
Rennlist Member
#37
Rennlist Member
I could use a 928 spare wheel this style if someone feels like hauling it to Carlisle:
#39
Rennlist Member
I have an air box top and bottom in very good condition, no cracks, etc. Can have it taken to Carlisle if anyone wants it. I think it is from a barn door year - 81 - 84. $50 Send me a pm.
#41
Rennlist Member
Anybody need a room at the Microtel?
This weekend was to be my first 928 event. However, my car decided otherwise. Won’t make this event. I have a room booked at the Microtel. If someone else wants the room can I transfer it somehow? Or is there a waiting list ready to snap it up?
#42
Rennlist Member
#43
Rennlist Member
Go
Come without the car! There's no shame in that.The more the merrier!
The following 4 users liked this post by hagen454:
85euro928 (04-27-2022),
Cymadesign (04-27-2022),
linderpat (04-27-2022),
Shawn Stanford (04-27-2022)
#44
Instructor
Any interest in 25mm hub centric-bolt on spacers? Purchased them from 928 Intl in 2020 in an attempt to move my phone dials out. Unfortunately I discovered that the 15" pd's did not have adequate space in the webbing to accommodate the lug nuts. I moved on to a nice set of Cup 1's. Paid $118.26 with shipping. PM me
#45
Rennlist Member
The following 2 users liked this post by SteveG:
Cymadesign (04-28-2022),
hagen454 (04-27-2022)