Brett Jenkins

My replacement engine is an 89 so I used the 89 wiring harness with VEMS. Problem is, I don't know which plug is for LH and which is EZK, they seem the same.

1 has part # 1 928 401 395, and the other has 1 928 401 402, but a search turns up nothing for either part#

Anybody know?

Rob Edwards

Look at the number and arrangement of the pins:

LH:




EZK:

jetson8859

The tabs at the bottom (in the picture) are different, you can't plug the LH into EZK or vice versa. In Rob's picture the LH has the tab with a notch in middle and the EZK has the notch on the right side.

soontobered84

Aren't the notches at the bottom of each plug in different locations? One is centered (the LH) and the other is off-center (the EZK)

Brett Jenkins

I don't have the factory computers, so knowing which has pins where and the significance of the notch at the bottom helps a lot/

Thanks!