Firewall lining strip clips partno needed
05-15-2019, 06:00 PM
#1
Burning Brakes
Thread Starter
Firewall lining strip clips partno needed
Hi All
The list of parts I need for the 86.5 firedamage rebuild is growing ever longer :-)
Most parts I can find in PET.
However, I am looking for the round clips that hold the thin aluminium strip that holds the engine firewall insulation to the top of the firewall.
On the donor car they were very tight and some were a little damaged, so want to replace them with new ones.
Have scrolled throug PET a couple of times now but no luck.
anyone know the partno for these?
thanks
Michel
The list of parts I need for the 86.5 firedamage rebuild is growing ever longer :-)
Most parts I can find in PET.
However, I am looking for the round clips that hold the thin aluminium strip that holds the engine firewall insulation to the top of the firewall.
On the donor car they were very tight and some were a little damaged, so want to replace them with new ones.
Have scrolled throug PET a couple of times now but no luck.
anyone know the partno for these?
thanks
Michel
05-15-2019, 07:07 PM
#2
Archive Gatekeeper
Rennlist Member
Rennlist Member
It's speed nut, 999 591 590 02. Listed on the '87+ PET page 807-00, but certainly used in '86.5 I know the aluminum strip was there as early as '80 but I think it was riveted on, not held on by the speed nuts.