Nicole

Click on this link and scroll down to the post by F-LY9280:

http://www.pff-online.de/wbb2/thread...htuser=&page=2

sweanders

I wonder what it looks like from another angle, it almost looks like if it could brake down the exhaust gasses from that picture.

MikeN

Looks nicely built......but I'm more of a fan of the twin-pipe outlet rather than the single bazooka style........

Lizard928

that works better for potatoes though

Tony

I like it, defintely another option. Did you find out where he got it from?

Nicole

He says it was made by Fuchs - the famous manufacturer of the forged Porsche rims. But I doubt this is still available these days - there are not all that many 928s in Germany anymore... (taxed to death, charged to death by mechanics, etc.)

I have sent the guy a PM, but he has not responded, yet. I'll let you know what I find out.

Dennis Wilson

Just had my temporary RMB welded in place. I used a set of truck (deisel) resonator tips and had a muffler shop weld in the connection to the muffler inlet flange. Since the 78 mufflers are NLA, the ANSA mufflers tend to rust (have one on my 78 euro) and I couldn't find an off the shelf RMB this was my only/best option. Sounds great and the cost was around $50 total.

Dennis

Dennis Wilson

Picture from under.

Dennis

JEC_31

Das ist heavily braced RMB!

Nicole

Just found out that the last known one of these "Bazookas" was sold in Germany for 400 Euros. At the current exchange rate that is about US$520.00 - a tiny little more than the $85 I paid for my used RMB on ebay...

Nicole

Here is another really nice one...

http://cgi.ebay.de/ws/eBayISAPI.dll?...category=38786