Ball joint insertion into spindle....tips or tricks?
#16
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Thanks guys, got the job done! My problem was the angle, like several posted. It wasnt much, but apparently enough to cause this problem. I dropped the arms off the chassis to gain more degrees of freedom, and they slid in with minimal persuasion like intended.
FWIW, these are Delphi ball joints purchased on Paragon parts. Quality seems to up to snuff.
FWIW, these are Delphi ball joints purchased on Paragon parts. Quality seems to up to snuff.
#17
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
These were made in Turkey. I didn't know they were Delphi when I ordered, they were just listed as aftermarket ball joints on the web page. I still have 2 new ones in a box that are going into my 951 when I put the suspension back together.