WTB: late camshaft
10-09-2003, 01:05 AM
#1
Race Car
Thread Starter
Join Date: Apr 2002
Location: FloriDUH
Posts: 3,817
Likes: 0
Received 0 Likes
on
0 Posts
WTB: late camshaft
hey all... seems like i could benefit from this, as i have an 86 dme/afm in my car. i suppose anything from 85.5-87 will work, as they are all the same. i have an early one for trade, actually i have two. i'm thinking somewhere around the $50 range... should be good for a decent used one, as they are bulletproof unless you totally run sand through the motor. so does anyone have one they can sell/trade me?
-Michael-
-Michael-
10-09-2003, 01:31 AM
#3
Race Car
Thread Starter
Join Date: Apr 2002
Location: FloriDUH
Posts: 3,817
Likes: 0
Received 0 Likes
on
0 Posts
nope, there was a change frome pre 85.5 to post 85.5, then probably again in 88 (i know they had different pistons, even more hp, but not sure about cam) but with this computer and everything on i'd like to get the correct cam to go with it.
-Michael-
-Michael-
10-09-2003, 10:57 AM
#6
Three Wheelin'
The cams changed is late 85. They added 6 degrees duraration to the exhaust. According to dyno results from Paul it is worth more HP.
I have an aftermarket cam if you are interested.
I have an aftermarket cam if you are interested.
Trending Topics
10-09-2003, 12:18 PM
#8
Race Car
Not a problem. Let me find one from the garage. $50 is ok with me, it should cover the time for me to get it out of the cam tower, package it, and take it to fed ex. I will look in the garage and take a pic after I get the thing out. Thanks.
10-09-2003, 04:05 PM
#9
Race Car
Thread Starter
Join Date: Apr 2002
Location: FloriDUH
Posts: 3,817
Likes: 0
Received 0 Likes
on
0 Posts
crap i meant the cam tower too... if i could, that would make it easier. all i'm asking for my early cams(in tower) are 50 each. should save you some work, and i'll pay for the heavier shipping.
-Michael-
-Michael-