FS: 1988 DME for N/A 8V Cars (944/924s)
#1
In the Sink
Rennlist Member
Rennlist Member
Thread Starter
FS: 1988 DME for N/A 8V Cars (944/924s)
Hello everyone.
I was trying to buy a DME for a backup for my '87 924S.
I bought a DME on ebay that was not listed correctly, it will only work for 1988 models. So, it's of no use for me.
Here are the numbers off the case:
BOSCH 0 261 200 086
Porsche PN: 944.618.121.05
TYP 944-MWS-02
Please confirm that this will work for your car just in case.
My understanding is that this was pulled from a running car.
I opened the lid to have a look, because the top of the case was pushed in just a little bit, I wanted to make sure nothing was getting shorted out to the case. It was never opened before this.
I would like to get $30 plus $10 S/H within the US. Or, I would take a straight-up trade for a working illuminated "Porsche" rear reflector that is still a deep red (matches the tail-lights, not orange-ish).
Is anyone interested? Please PM me.
Thanks!
I was trying to buy a DME for a backup for my '87 924S.
I bought a DME on ebay that was not listed correctly, it will only work for 1988 models. So, it's of no use for me.
Here are the numbers off the case:
BOSCH 0 261 200 086
Porsche PN: 944.618.121.05
TYP 944-MWS-02
Please confirm that this will work for your car just in case.
My understanding is that this was pulled from a running car.
I opened the lid to have a look, because the top of the case was pushed in just a little bit, I wanted to make sure nothing was getting shorted out to the case. It was never opened before this.
I would like to get $30 plus $10 S/H within the US. Or, I would take a straight-up trade for a working illuminated "Porsche" rear reflector that is still a deep red (matches the tail-lights, not orange-ish).
Is anyone interested? Please PM me.
Thanks!
Last edited by 89magic98; 08-14-2020 at 02:29 AM.
#3
Nerd Herder
Rennlist Member
Rennlist Member
so.. Kev... It's not the same as a 924S DME??? I always thought the dme's were the same .. or is it early vs late again?? That looks exactly like mine.
#4
chris - 87 and 88 were different, compression ratios were different.
on a side note - i have a chip for that dme/car for sale, will only fit 88 944/924S, its a brand new never installed weltmeister chip.
$75 complete with instructions and everything, shipping included.
-Michael-
on a side note - i have a chip for that dme/car for sale, will only fit 88 944/924S, its a brand new never installed weltmeister chip.
$75 complete with instructions and everything, shipping included.
-Michael-
#5
In the Sink
Rennlist Member
Rennlist Member
Thread Starter
Chris,
The '87 DME for 924s/944 was 944.618.121.04
The '88 DME for 924s/944 was 944.618.121.05
I think this was because of the compression bump for '88. So, this would work only for an '88 924s/944.
The '87 DME for 924s/944 was 944.618.121.04
The '88 DME for 924s/944 was 944.618.121.05
I think this was because of the compression bump for '88. So, this would work only for an '88 924s/944.
Last edited by 89magic98; 08-14-2020 at 02:29 AM.
#7
In the Sink
Rennlist Member
Rennlist Member
Thread Starter
The factory manuals specify that it is a different DME. I don't want to experiment with my car to find out.
I will probably go and list it on ebay either tomorrow or Wednesday - noone seems interested.
I will probably go and list it on ebay either tomorrow or Wednesday - noone seems interested.
Last edited by 89magic98; 08-14-2020 at 02:29 AM.