Garage sale, nice parts inside
#1
Thread Starter
Rennlist Lifetime Member
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Joined: Jul 2002
Posts: 2,130
Likes: 0
From: Northern Virginia
Garage sale, nice parts inside
Clearing some things out of the garage to make room for some different parts. All prices are OBO, shipping and Paypal fees on buyer. Shipping is from Northern Virginia and local deals are strongly preferred.
1) Pair of perfect 944 seats reupholstered in black leather with guards red leather inserts. These have maybe 5k miles on them since I had the reupholstered. Looked great in my 944, work in many other models. Driver's power, passenger manual. $950
2) Dynatech Strut tower brace. Rare part and in great shape. This is the 8v model, worked perfectly on my 951. $700
Attachment 1361171
1) Pair of perfect 944 seats reupholstered in black leather with guards red leather inserts. These have maybe 5k miles on them since I had the reupholstered. Looked great in my 944, work in many other models. Driver's power, passenger manual. $950
2) Dynatech Strut tower brace. Rare part and in great shape. This is the 8v model, worked perfectly on my 951. $700
Attachment 1361171
#3
Thread Starter
Rennlist Lifetime Member
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Joined: Jul 2002
Posts: 2,130
Likes: 0
From: Northern Virginia
Thanks man - they look fantastic installed. I will be sad to see them go, but carbon fiber GT3 seats took their place as I am rebuilding the car as a clubsport. I would keep them but I am realizing my overstuffed parts shelf is full of parts I will not be using.
Any interest in a 8V cam cover/cam gear cover in texture back powercoat and 951 intake manifold in gloss silver powder? I have another setup in texture red but will probaby keep that.
Also have a texture back 16v cam cover $150
Red unused powdercoated 3 piece Lindsey racing crossmember $300
Le-Mans style fiberglass spoiler from the old Huntley racing Zebra car $200 local only
Any interest in a 8V cam cover/cam gear cover in texture back powercoat and 951 intake manifold in gloss silver powder? I have another setup in texture red but will probaby keep that.
Also have a texture back 16v cam cover $150
Red unused powdercoated 3 piece Lindsey racing crossmember $300
Le-Mans style fiberglass spoiler from the old Huntley racing Zebra car $200 local only
#4
Thread Starter
Rennlist Lifetime Member
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Joined: Jul 2002
Posts: 2,130
Likes: 0
From: Northern Virginia
Also have red fiberglass euro NA front bumper and fiberglass euro rear lower valence. Both are used in good condition, with minor cosmetic imperfections.
#5
Thread Starter
Rennlist Lifetime Member
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Joined: Jul 2002
Posts: 2,130
Likes: 0
From: Northern Virginia
Koni Yellow rebound adjustable rear shocks $100
60k mile NA torsion bars, spring plates, spring plate covers - $70
Fiberglass NA euro front bumper - minor cosmetic damage at edges which is not visible when installed
$250
Fiberglass euro rear lower valence - $150
60k mile NA lower valence - good shape, guards red $150
60k mile NA rear bumper - $75
60k mile NA trans non LSD - $300
Brey Krauss Castor block brace, powdercoated red and not used since powder coat - $200
PORSCHE rear center light - 2 of them. $75/each
951 8v powdercoated Cam tower, cam gear cover, cam tower end cap, coolant return, intake manifold - $300
Cam tower, cam gear cover and cam cover end cap are texture black, with PORSCHE sanded down to bare aluminum. Coolant return and intake manifold are two-stage gloss silver. Not used since coating
60k mile NA torsion bars, spring plates, spring plate covers - $70
Fiberglass NA euro front bumper - minor cosmetic damage at edges which is not visible when installed
$250
Fiberglass euro rear lower valence - $150
60k mile NA lower valence - good shape, guards red $150
60k mile NA rear bumper - $75
60k mile NA trans non LSD - $300
Brey Krauss Castor block brace, powdercoated red and not used since powder coat - $200
PORSCHE rear center light - 2 of them. $75/each
951 8v powdercoated Cam tower, cam gear cover, cam tower end cap, coolant return, intake manifold - $300
Cam tower, cam gear cover and cam cover end cap are texture black, with PORSCHE sanded down to bare aluminum. Coolant return and intake manifold are two-stage gloss silver. Not used since coating
#6
Thread Starter
Rennlist Lifetime Member
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Joined: Jul 2002
Posts: 2,130
Likes: 0
From: Northern Virginia
19mm spacers: $75
NA Airbox w/ K&N Filter - $75
S airbox with 2 extra filters - $50
951 A-Pillar gauge pod, never used/installed $50
Cruise control module, plus throttle cable and pedal-mount lever arm
Aluminum Rennline pedal cover set powdercoated texture black and never used since powdercoat - $150 - EDIT: I am going to keep the black ones as these are the heel/toe setup. I will sell the 3-piece raw aluminum Rennline pedal covers for $125
944S swaybars F/R - $50
If you are thinking trades, I am looking for:
951 diffuser, guards, must have all mounting tabs
Strut tower brace for 16v motor
Aftermarket headers, test pipe, exhaust for NA motor, header with 8v or 16v flanges don't care which
RS Door panels (do these even exist?)
Roll cage camera mount
Battery relocate kit
944 turbo/968 front brake pads (pagid, hawk, etc. mildly used ok - these are actually the rear brakes in my setup)
oil filters
Fan Relay
944S chip (FR wilk?, Rogue tuning?)
Torsion tube upper lever arm solid mount
Transmission solid mount
Roll cage padding
Non-expired 6-point cam lock harnesses
Willing to trade + or - cash on all of the above
NA Airbox w/ K&N Filter - $75
S airbox with 2 extra filters - $50
951 A-Pillar gauge pod, never used/installed $50
Cruise control module, plus throttle cable and pedal-mount lever arm
Aluminum Rennline pedal cover set powdercoated texture black and never used since powdercoat - $150 - EDIT: I am going to keep the black ones as these are the heel/toe setup. I will sell the 3-piece raw aluminum Rennline pedal covers for $125
944S swaybars F/R - $50
If you are thinking trades, I am looking for:
951 diffuser, guards, must have all mounting tabs
Strut tower brace for 16v motor
Aftermarket headers, test pipe, exhaust for NA motor, header with 8v or 16v flanges don't care which
RS Door panels (do these even exist?)
Roll cage camera mount
Battery relocate kit
944 turbo/968 front brake pads (pagid, hawk, etc. mildly used ok - these are actually the rear brakes in my setup)
oil filters
Fan Relay
944S chip (FR wilk?, Rogue tuning?)
Torsion tube upper lever arm solid mount
Transmission solid mount
Roll cage padding
Non-expired 6-point cam lock harnesses
Willing to trade + or - cash on all of the above
Trending Topics
#11
Thread Starter
Rennlist Lifetime Member
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Joined: Jul 2002
Posts: 2,130
Likes: 0
From: Northern Virginia
I am in Great Falls, VA. Here are some pics of the LeMans spoiler. Again, this thing is huge and would not feasible to ship.
MDJ577 - to PM, click where my forum name is. A drop down will appear and the option to send a PM will be one of them.
MDJ577 - to PM, click where my forum name is. A drop down will appear and the option to send a PM will be one of them.
#12
Thread Starter
Rennlist Lifetime Member
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Joined: Jul 2002
Posts: 2,130
Likes: 0
From: Northern Virginia
#13
Is there damage on the top passenger side of the spoiler or is it just paint missing?
Does it mount to the hatch the same way as the stock spoiler? And whats with the latches on the back?
Either way i will pm you when i get home as my mobile phone will not let me.
Does it mount to the hatch the same way as the stock spoiler? And whats with the latches on the back?
Either way i will pm you when i get home as my mobile phone will not let me.
#14
Thread Starter
Rennlist Lifetime Member
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Joined: Jul 2002
Posts: 2,130
Likes: 0
From: Northern Virginia
It does not mount in the same way as the stock spoiler as this is set up for a race car. It mounts via the mounting studs you see, and the latches on the back were used on the race car to allow for opening/closing the rear hatch via hinges
#15