Notices
924/931/944/951/968 Forum Porsche 924, 924S, 931, 944, 944S, 944S2, 951, and 968 discussion, how-to guides, and technical help. (1976-1995)
Sponsored by:
Sponsored by:

944S2 tweeter cover niggle

Thread Tools
 
Search this Thread
 
Old 04-03-2014 | 11:20 AM
  #1  
ChrisRL's Avatar
ChrisRL
Thread Starter
Advanced
 
Joined: Jun 2013
Posts: 72
Likes: 0
Default 944S2 tweeter cover niggle

Good morning!
The metal grille off the tweeter cover on the driver side door keeps popping off.
Any recommends for a permanent fix?
Old 04-03-2014 | 12:13 PM
  #2  
MAGK944's Avatar
MAGK944
Nordschleife Master
 
Joined: Jun 2007
Posts: 6,769
Likes: 298
From: Palm Beach, Florida
Default

This happened to mine also, the plastic by the screws that hold the tweeter in gets brittle with age and breaks. I took mine out and rebuilt it with epoxy. It might also be one of the lug has broken of the cover, same process, rebuild with epoxy.

Last time I looked the parts were either nla or too expensive from the dealer.
Old 04-03-2014 | 12:23 PM
  #3  
azbanks's Avatar
azbanks
Freedom Enthusiast
Rennlist Member
 
Joined: Feb 2007
Posts: 7,905
Likes: 3
From: Phoenix Arizona
Default

I used a tiny bit of dynamat(sound deadening material) made into a tiny roll and put it in the groove of the plastic piece. The grill stick to the dynamat very well.



Quick Reply: 944S2 tweeter cover niggle



All times are GMT -3. The time now is 06:05 PM.