Hello,

It looks like the three threaded nutholes (for the 10mm bolts) on my headlight motor are starting to strip out. They never really get tight when I install the motor.

Is there any simple/inexpensive way that the threadholes can be repaired? The motor is fine otherwise. I don't have a lot of experience in tapping/threading. After the repair is done, I would still like to be able to install/remove the motor in the future.

Thanks for everyone's feedback!

-Kevin

 

Maybe you could tap the holes one size larger, e.g. 11 mm, or a similar SAE size, and put corresponding bolts?