Torque spec
02-15-2014 | 04:42 PM
#2
Rennlist Member
Joined: Nov 2012
Posts: 4,774
Likes: 69
From: Houston TX
02-15-2014 | 04:49 PM
#3
Rennlist Member
Joined: Feb 2008
Posts: 1,263
Likes: 1
From: Frederick, MD
Per the service manual:
Engine Type M44.01-10
Applicable with conjunction with 12 mm high nut and new washer
1st stage - 20Nm
2nd stage - 90 degree torque angle
3rd stage - 90 degree torque angle
A light film of oil must be applied to the stud threads.
Engine Type M44.01-10
Applicable with conjunction with 12 mm high nut and new washer
1st stage - 20Nm
2nd stage - 90 degree torque angle
3rd stage - 90 degree torque angle
A light film of oil must be applied to the stud threads.