Madan

No problem I can wait. The car is driving well but I feel some vibration at around 90km/h my mechanic said to change the bearings of the torc. The car has only 146000 kms. I drive it once a while. Did only 700 kms. in a year with this car. Please inform me when you are going to make.

Perry 951

Since you are getting a batch done.. I'll take a set. Do you still have a source for the bearings? Probably easiest for me to just get the whole package from you that way I know it will be correct.

mj951

I'd be in for a package, including bearings, as well.
No rush, I've seen your home build thread and you have a few things going on!

pfarah7

Please put me down for a set of sleeves only, thanks!

Patrick

lindved

Hello. I would also like to sign up for a set of sleeves for Denmark, without bearings.

daniel930

Hi, I would also like a set, any chance they are available?

Zirconocene

I'd forgotten about this thread but if there's activity in getting more made, I'd be interested. I have the split torque tube so I'm out of luck on the Black Sea bearings and I'm trying to avoid sourcing a non-split TT. Any feedback/experience with previous users on the split design TT? I have a nasty vibration at a consistent part of the RPM range and I'm leaning toward this being the issue (pretty sure it's not the balance shaft timing but I'm going to look into that, too).

Anyway, the car was rode hard and put away wet before my ownership, so this is probably a needed maintenance item.

Mr Exotherm

I'd be interested in a set of bearings and sleeves if the price and shipping to the US are reasonable.

Aivar88

interested too, bearings and sleeves, plus shipping to Estonia ?

Voith

Was too busy these past few months with everything, moved to new house, got a new family member etc I will call the bearing place and delrin shop today to see what prices are we talking about since it's been few years..

Since there are 9 of you interested, I'll be making 10 sets if anyone else wants a set or any of you don't need it anymore please let me know.

Madan
Perry 951
mj951
pfarah7
lindved
daniel930
Zirconocene
Mr Exotherm
Aivar88


BTW those of you, who bought these from me in 2016, how are they working out for you? Never heard anything back.

Jay Wellwood

I'll take the #10 spot.

AnthonyGS

I’d be interested in having a set on hand for future use, if that’s still possible. With or without bearings, little difference to me.

Voith

Due to this schitty flu, lead time for these as of now is ∞.

When things settle a bit, I should get my ordered pieces and I'll let you know then..

pfarah7

Thanks for the update; be well!

928AUS

Hi, I'm interested too, bearings and sleeves. are you still doing them?